Sample Record for 2023-09-15-1
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 215649 DEA: 043G4884 EFIS: 0412000088
QA Service Level: 1
DIST-CO-RTE-PM: 04-SM-92-R14.4/R18.8
Work Description: CLEAN AND PAINT STEEL BRIDGE TOWERS, REPLACE HIGH STRENGTH BOLTS.
Location Description: SAN MATEO COUNTY IN FOSTER CITY FROM SAN MATEO-HAYWARD BRIDGE TO ALAMEDA COUNTY LINE
Contractor Name: Cekra, Inc. (Nash Hale)
Contractor Address: PO Box 7964, Wilmington, NC 28406
Resident Engineer: Kingston Atako Structure Rep.: Stanley Ku
Sample Information
DIME Sample ID: 2023-09-15-1
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Vallejo Field Laboratory
Sample Organization Contact: (510) 774-6009
Type of Sample: Acceptance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 09/15/2023
Date that the sample was received by the laboratory/organization performing the testing: 09/22/2023
The quantity of what the sample constitutes: 1640
A brief description of the sample: 5/8" A325 fastener set
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name: San Mateo
The fabricator/manufacturer/facility name: Cekra
Material Information
Rocap Number(s):
Heat Number(s): 20857550, 234358, 32310040
Nut Mfg. Lot Number(s): 38850-234358
Washer Mfg. Lot Number(s): 0423-694
Bolt Specification: A325
Bolt Length(s): 2-1/4
Nut Specification: ASTM A563
Washer Specification: ASTM F436
Finish: Mech Galv
Diameter/Size: 5/8
Bolt Mfg. Lot Number: 38277-20857550
Rocap Test Requirement(s):
Lubricant Requirements(s):
Test Results
Test 1 of 19
DIME Test ID: 2023-09-15-1-1
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 10/03/2023
Date Tested: 09/25/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Wedge Tensile
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples
|
1
|
Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | 1A | 38277-20857550 | 0.6250 | 33075 | 147.13 | 10.00 | Wedge Tensile | aauvinen |
| |
UTM
|
450kip
|
Temperature
|
no data
|
Test 2 of 19
DIME Test ID: 2023-09-15-1-2
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 10/03/2023
Date Tested: 09/25/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Wedge Tensile
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples
|
1
|
Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | 1B | 38277-20857550 | 0.6250 | 33126 | 147.35 | 10.00 | Wedge Tensile | aauvinen |
| |
UTM
|
450kip
|
Temperature
|
no data
|
Test 3 of 19
DIME Test ID: 2023-09-15-1-3
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 10/03/2023
Date Tested: 09/25/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | 1A | | | 38139 | | Proof Load | |
| |
UTM
|
450kip
|
Temperature
|
72 f
|
Test 4 of 19
DIME Test ID: 2023-09-15-1-4
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 10/03/2023
Date Tested: 09/25/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Proof Load
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | 1B | | | 38438 | | Proof Load | |
| |
UTM
|
450kip
|
Temperature
|
72 f
|
Test 5 of 19
DIME Test ID: 2023-09-15-1-5
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/03/2023
Date Tested: 09/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
38277-20857550
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325TC USA
|
Size
|
0.625 in
|
Bolt Length
|
2.25 in
|
Gage Type
|
Pass
|
Test 6 of 19
DIME Test ID: 2023-09-15-1-6
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/03/2023
Date Tested: 09/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
38277-20857550
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325TC USA
|
Size
|
0.625 in
|
Bolt Length
|
2.25 in
|
Gage Type
|
Pass
|
Test 7 of 19
DIME Test ID: 2023-09-15-1-7
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/03/2023
Date Tested: 09/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
38277-20857550
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325TC USA
|
Size
|
0.625 in
|
Bolt Length
|
2.25 in
|
Gage Type
|
Pass
|
Test 8 of 19
DIME Test ID: 2023-09-15-1-8
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/03/2023
Date Tested: 09/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
38277-20857550
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325TC USA
|
Size
|
0.625 in
|
Bolt Length
|
2.25 in
|
Measurement Average
|
2.27 mils
|
Test 9 of 19
DIME Test ID: 2023-09-15-1-9
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/03/2023
Date Tested: 09/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
38277-20857550
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325TC USA
|
Size
|
0.625 in
|
Bolt Length
|
2.25 in
|
Measurement Average
|
2.97 mils
|
Test 10 of 19
DIME Test ID: 2023-09-15-1-10
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/03/2023
Date Tested: 09/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
38277-20857550
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
A325TC USA
|
Size
|
0.625 in
|
Bolt Length
|
2.25 in
|
Measurement Average
|
3.09 mils
|
Test 11 of 19
DIME Test ID: 2023-09-15-1-11
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/03/2023
Date Tested: 09/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
38850-234358
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
U DH
|
Size
|
0.625 in
|
Bolt Length
|
no data in
|
Measurement Average
|
2.51 mils
|
Test 12 of 19
DIME Test ID: 2023-09-15-1-12
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/03/2023
Date Tested: 09/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
38850-234358
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
U DH
|
Size
|
0.625 in
|
Bolt Length
|
no data in
|
Measurement Average
|
2.27 mils
|
Test 13 of 19
DIME Test ID: 2023-09-15-1-13
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/03/2023
Date Tested: 09/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
38850-234358
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
U DH
|
Size
|
0.625 in
|
Bolt Length
|
no data in
|
Measurement Average
|
2.52 mils
|
Test 14 of 19
DIME Test ID: 2023-09-15-1-14
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/03/2023
Date Tested: 09/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
0423-694
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
TSI F436
|
Size
|
0.625 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.07 mils
|
Test 15 of 19
DIME Test ID: 2023-09-15-1-15
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/03/2023
Date Tested: 09/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
0423-694
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
TSI F436
|
Size
|
0.625 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.16 mils
|
Test 16 of 19
DIME Test ID: 2023-09-15-1-16
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/03/2023
Date Tested: 09/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
0423-694
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
TSI F436
|
Size
|
0.625 in
|
Bolt Length
|
no data in
|
Measurement Average
|
3.11 mils
|
Test 17 of 19
DIME Test ID: 2023-09-15-1-17
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/03/2023
Date Tested: 09/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
0423-694
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
TSI F436
|
Size
|
0.625 in
|
Bolt Length
|
no data in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
42.05
|
Spacing
|
Ok
|
Test 18 of 19
DIME Test ID: 2023-09-15-1-18
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/03/2023
Date Tested: 09/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
0423-694
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
TSI F436
|
Size
|
0.625 in
|
Bolt Length
|
no data in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
40.8
|
Spacing
|
Ok
|
Test 19 of 19
DIME Test ID: 2023-09-15-1-19
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/03/2023
Date Tested: 09/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1C
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
0423-694
|
Finish Coating
|
ASTM B695 - Mech Galv
|
Product Markings
|
TSI F436
|
Size
|
0.625 in
|
Bolt Length
|
no data in
|
Hardness Reading Scale
|
C Scale
|
Hardness Reading Average
|
41.15
|
Spacing
|
Ok
|