Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 215157 DEA: 021H5704 EFIS: 0216000036
QA Service Level: 1
DIST-CO-RTE-PM: 02-SHA-299-67.8/77.8
Work Description: BURNEY CAPM - PAVEMENT REHABILITATION
Location Description: BUNCH GRASS LOOKOUT RD TO NAPA LN
Contractor Name: JF Shea Constrcution
Contractor Address: 17400 Clear Creek Road, Redding, CA 96001
Resident Engineer: Kyle Higgins Structure Rep.: Unknown
DIME Sample ID: 2023-08-23-85
TL Number from the TL Form: 857914
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/23/2023
Date that the sample was received by the laboratory/organization performing the testing: 08/23/2023
The quantity of what the sample constitutes: 8 Boxes
A brief description of the sample: 8 boxes of Lime Treated 1/2inch RHMA-G (PG 64-16 CR) with WMA
From where was the sample collected: Manufacturer
Laboratory sample identification: D79334
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: J.F. Shea Construction — Fawndale Rock and Asphalt (Redding, CA)
DIME Test ID: 2023-08-23-85-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 03/15/2024
Date Tested: 08/23/2023
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: Gmm=2.445
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Number of Samples
|
1
|
|
What is the unit of measurement for theoretical density?
|
SI Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
Mechanical Agitation - Method A
|
|
Mass of container filled with water 1
|
7335.1 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
2611.7 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8878.6 grams
|
|
Temperature of Water
|
76.6 °F
|
|
Specific Gravity for Sample 1
|
2.445
|
|
Theoretical maximum density at 25°C (77°F)
|
2438 kg/m^3
|
DIME Test ID: 2023-08-23-85-2
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 03/15/2024
Date Tested: 09/06/2023
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: S1=106, S2=84, TSR=80.%
Test Result Compliance: complies
Additional Comments When Verified:
|
Unit system used?
|
SI Units
|
|
Average Dry Tensile Strength
|
106 psi
|
|
Average Wet Tensile Strength
|
84 psi
|
|
Tensile Strength Ratio
|
0.79
|
