Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 66667 DEA: JMFPP EFIS: 0019000043
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2023-09-07-39
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 09/07/2023
Date that the sample was received by the laboratory/organization performing the testing: 09/11/2023
The quantity of what the sample constitutes: 6 Bags
A brief description of the sample: Aggregate
From where was the sample collected: Source
Laboratory sample identification: 23-JMFPP-0172
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Construction
Source Identification (SMARA, name of Pit or Job Site): 91-39-0002
The fabricator's/manufacturer's product name for the sample: 1073
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: HMA Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:
DIME Test ID: 2023-09-07-39-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 09/15/2023
Date Tested: 09/14/2023
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bang.d.nguyen@dot.ca.gov
Organization Phone: (916) 227-7204
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested?
|
HMA Gradation
|
Individual mass retained on the 1 1/2 in. sieve
|
0.0 grams
|
Individual mass retained on the 1 in. sieve
|
0.0 grams
|
Individual mass retained on the 3/4 in. sieve
|
0.0 grams
|
Individual mass retained on the 1/2 in. sieve
|
39.7 grams
|
Individual mass retained on the 3/8 in. sieve
|
261.6 grams
|
Individual mass retained on the #4 sieve
|
1021.8 grams
|
Individual mass retained on the #8 sieve
|
232.6 grams
|
Individual mass retained on the #16 sieve
|
123.5 grams
|
Individual mass retained on the #30 sieve
|
70.3 grams
|
Individual mass retained on the #50 sieve
|
54.9 grams
|
Individual mass retained on the #100 sieve
|
39.1 grams
|
Individual mass retained on the #200 sieve
|
21.3 grams
|
Individual mass retained on the pan
|
1.2 grams
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
Cumulative percent passing the 1/2 in. sieve
|
99 %
|
Cumulative percent passing the 3/8 in. sieve
|
92 %
|
Cumulative percent passing the #4 sieve
|
65 %
|
Cumulative percent passing the #8 sieve
|
40 %
|
Cumulative percent passing the #16 sieve
|
26 %
|
Cumulative percent passing the #30 sieve
|
18 %
|
Cumulative percent passing the #50 sieve
|
12 %
|
Cumulative percent passing the #100 sieve
|
8 %
|
Cumulative percent passing the #200 sieve
|
5.7 %
|
DIME Test ID: 2023-09-07-39-2
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Verified Date: 09/15/2023
Date Tested: 09/15/2023
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bang.d.nguyen@dot.ca.gov
Organization Phone: (916) 227-7204
General Comments for this Test: Bulk specific gravity (SSD) of fine aggregate - Bulk specific gravity of fine aggregate - Bulk specific gravity of fine aggregate - Apparent specific gravity of supplemental fines - Absorption of fine aggregate.
Test Result Compliance:
Additional Comments When Verified:
Bulk specific gravity
|
2.553
|
Bulk specific gravity (SSD Basis)
|
2.611
|
Apparent specific gravity
|
2.710
|
Absorption
|
2.3 %
|
DIME Test ID: 2023-09-07-39-3
Test Method: AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)
Verified Date: 09/15/2023
Date Tested: 09/15/2023
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bang.d.nguyen@dot.ca.gov
Organization Phone: (916) 227-7204
General Comments for this Test: Bulk Specific Gravity (Oven Dry) of Coarse Aggregate-Absorption of Coarse Aggregate.
Test Result Compliance:
Additional Comments When Verified:
Basis for relative density testing
|
Bulk
|
Specific Gravity
|
2.632
|
Absorption
|
1.2 %
|
DIME Test ID: 2023-09-07-39-4
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 09/15/2023
Date Tested: 09/15/2023
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bang.d.nguyen@dot.ca.gov
Organization Phone: (916) 227-7204
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified: