Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 995022 DEA: 09392104 EFIS: 0922000034
QA Service Level: 1
DIST-CO-RTE-PM: 09--58-R107.7/R118.0
Work Description: Place RHMA-G (Bonded Wearing Course) over existing pavement.
Location Description: IN KERN COUNTY ABOUT 17 MILES EAST OF TEHACHAPI FROM 0.1 MILE EAST OF CACHE CREEK BRIDGE TO 1.8 MILES EAST OF BUSINESS ROUTE 58 OVERCROSSING.
Contractor Name: GRIFFITH COMPANY
Contractor Address: 1128 Carrier Parkway Ave, Bakersfield, CA 93308
Resident Engineer: Hin Hartanto Structure Rep.: Unknown
DIME Sample ID: 2023-08-11-54
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/11/2023
Date that the sample was received by the laboratory/organization performing the testing: 09/11/2023
The quantity of what the sample constitutes: 4 BOXES OF HMA
A brief description of the sample: 1/2" RHMA-G-1% LSM
From where was the sample collected: Manufacturer
Laboratory sample identification: 0466G-23
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Griffith Edmonston-Lebec
DIME Test ID: 2023-08-11-54-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/15/2023
Date Tested: 09/12/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used?
|
Celsius
|
Test procedure used?
|
Method A
|
Mass of HMA Sample prior to ignition
|
1612.2 g
|
Corrected Asphalt Binder Content
|
7.36 %
|
Mass Loss
|
125.1 g
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.21 %
|
Moisture Content
|
0.00 %
|
Temperature Compensation Factor
|
0.19 %
|
Test Temperature
|
538 C
|