Print Report | Back to Sample Detail

Sample Record for 2023-06-29-60

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994128 DEA: 043W5304 EFIS: 0421000385 QA Service Level: 1
DIST-CO-RTE-PM: 04-CC-680-1.09
Work Description: POLYESTER CONCRETE OVERLAY AND GRIND EXISTING CONCRETE PAVEMENT.
Location Description: BRIDGE DECK PROGRAM
Contractor Name: MYERS & SONS CONSTRUCTION LLC
Contractor Address: Unknown
Resident Engineer: Rabindra Mukherjee Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-06-29-60
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Concord Field Laboratory
Sample Organization Contact: (510) 714-7019
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/29/2023
Date that the sample was received by the laboratory/organization performing the testing: 07/05/2023
The quantity of what the sample constitutes: Vulcan Pleasanton Drier Drum Plant 25%RAP
A brief description of the sample: 1/2-INCH HMA Types A and B 25%RAP
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Pleasanton Drier Drum

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number: 320302W
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2023-06-29-60-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/08/2023
Date Tested: 07/05/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test: Vulcan Pleasanton Drier Drum 25%RAP
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 1731.6 g
Corrected Asphalt Binder Content 1.83 %
Mass Loss 125.8 g
Correction Factor (Percent by mass of HMA Specimen) 5.26 %
Moisture Content no data0 %
Temperature Compensation Factor 0.17 %
Test Temperature 538 C

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2023-06-29-60-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)09/08/2023Not scheduledIGNACIO ARECHIGACT D04 - Concord Field LaboratoryVulcan Pleasanton Drier Drum 25%RAP