Print Report | Back to Sample Detail

Sample Record for 2016-03-15-7

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 8196 DEA: 59912684 QA Service Level: 1
DIST-CO-RTE-PM: 59---
Work Description:
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2016-03-15-7
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM4 - Prestressing Strand
Sample Taken Date: 03/15/2016
Date that the sample was received by the laboratory/organization performing the testing: 03/22/2016
The quantity of what the sample constitutes: 8
A brief description of the sample: .6in Prestressing Strand
From where was the sample collected: Fabricator
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Sumiden Wire

Material Information

Comments: Unknown
Reel/Coil/Pack Number(s): S333148-6-1, S333498-5-1, S333516-2-1, S333529-5-1, S333531-2-1, S333532-3-1, S333554-1-1
Number of Coils: Unknown
Group Number: 10843
Strand Diameter:
Grade: 270
Strand Specification: ASTM A 882
Heat Number(s): S0591314-2, S0556815, S0556715, S0592215, S0544815-2, S0544615
Mfg. Lot Number(s): NA
Manufacturer(s): Sumiden Wire

Test Results

Test 1 of 2

DIME Test ID: 2016-03-15-7-1
Test Method: ASTM A416-15: Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete (Strand Diameter Check)
Verified Date: 03/24/2016
Date Tested: 03/24/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of Samples 7
Dia of the Center Wire (in)Dia of the Outer Wire 1 (in)Dia of the Outer Wire 2 (in)Dia of the Outer Wire 3 (in)Dia of the Outer Wire 4 (in)Dia of the Outer Wire 5 (in)Dia of the Outer Wire 6 (in)Area (sqin)
.207.195.195.195.195.195.1950.213
.207.195.195.195.195.195.1950.213
.206.196.196.196.196.196.1960.214
.208.197.197.197.197.197.1970.217
.207.196.196.196.196.196.1960.215
.207.196.196.196.196.196.1960.215
.207.197.197.197.197.197.1970.217

Test 2 of 2

DIME Test ID: 2016-03-15-7-2
Test Method: ASTM A416-15: Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
Verified Date: 03/24/2016
Date Tested: 03/24/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of Samples 7
Heat NumberCoilArea (sqin)Peak Load (lbf)Load at EUL (lbf)Chord Modulus (Msi)Elongation (in)Tested By
SO591314-2S333148-6-10.213596665461528.41.61Brian
SO556815S333498-5-10.2135906928.51.75Brian
SO556715S333516-2-10.2145959727.81.63Brian
SO592215S333529-5-10.2176052428.11.79Brian
SO544815-2S333531-2-10.2155961627.81.67Brian
SO544815-2S333532-3-10.21559150281.77Brian
SO544615S333554-1-10.21760118281.84Brian
UTM 120KIP
Temperature 70 F
Extensometers E88766