Print Report | Back to Sample Detail

Sample Record for 2023-08-23-25

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214830 DEA: 043G6304 EFIS: 0412000409 QA Service Level: 1
DIST-CO-RTE-PM: 04-SCL-4-SCl-9 -4.75/4.9
Work Description: Saratoga Creek Bridge Rehabilitation Project
Location Description: San Jose - Saratoga Creek
Contractor Name: Myers and Sons
Contractor Address: 4600 NORTHGATE BLVD, STE 100, SACRAMENTO, CA 95834
Resident Engineer: Arif Khan Structure Rep.: OANH BUI

Sample Information

DIME Sample ID: 2023-08-23-25
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 08/23/2023
Date that the sample was received by the laboratory/organization performing the testing: 08/29/2023
The quantity of what the sample constitutes: 1 lot of 514
A brief description of the sample: High Strength Bolts
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier: 37-0074
Structure name: Saratoga Creek Bridge
The fabricator/manufacturer/facility name: St Louis Screw and Bolt

Material Information

Rocap Number(s): TT0169285
Heat Number(s): 10797110
Nut Mfg. Lot Number(s):
Washer Mfg. Lot Number(s):
Bolt Specification: ASTM A325
Bolt Length(s): 2-1/4"
Nut Specification: NA
Washer Specification: NA
Finish: ASTM A153/F2329 Hot Dip
Diameter/Size: 7/8"
Bolt Mfg. Lot Number: BG2413
Rocap Test Requirement(s): YES
Lubricant Requirements(s): NO
Test results on following page(s): 9

Test Results

Test 1 of 9

DIME Test ID: 2023-08-23-25-1
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/08/2023
Date Tested: 08/31/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2413
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .875 in
Bolt Length 2.25 in
Gage Type Pass

Test 2 of 9

DIME Test ID: 2023-08-23-25-2
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/08/2023
Date Tested: 08/31/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2413
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .875 in
Bolt Length 2.25 in
Measurement Average 5.46 mils

Test 3 of 9

DIME Test ID: 2023-08-23-25-3
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/08/2023
Date Tested: 08/31/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2413
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .875 in
Bolt Length 2.25 in
Measurement Average 5.28 mils

Test 4 of 9

DIME Test ID: 2023-08-23-25-4
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/08/2023
Date Tested: 08/31/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2413
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .875 in
Bolt Length 2.25 in
Measurement Average 7 mils

Test 5 of 9

DIME Test ID: 2023-08-23-25-5
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/08/2023
Date Tested: 09/08/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2413
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .875 in
Bolt Length 2.25 in
Hardness Reading Scale C Scale
Hardness Reading Average 29.87
Spacing Ok

Test 6 of 9

DIME Test ID: 2023-08-23-25-6
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/08/2023
Date Tested: 09/08/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2413
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .875 in
Bolt Length 2.25 in
Hardness Reading Scale C Scale
Hardness Reading Average 28.9
Spacing Ok

Test 7 of 9

DIME Test ID: 2023-08-23-25-7
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 09/08/2023
Date Tested: 09/08/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2413
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .875 in
Bolt Length 2.25 in
Hardness Reading Scale C Scale
Hardness Reading Average 29.23
Spacing Ok

Test 8 of 9

DIME Test ID: 2023-08-23-25-8
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/08/2023
Date Tested: 09/08/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2413
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .875 in
Bolt Length 2.25 in
Gage Type Pass

Test 9 of 9

DIME Test ID: 2023-08-23-25-9
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/08/2023
Date Tested: 09/08/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BG2413
Finish Coating ASTM F2329 - Hot Dip
Product Markings A325 SL USA
Size .875 in
Bolt Length 2.25 in
Gage Type Pass