Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993806 DEA: 07330504 EFIS: 0716000214
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-710-R15.1/21.9
Work Description: INSTALL HIGHWAY PLANTING AND PLACE MINOR CONCRETE.
Location Description: LOS ANGELES COUNTY AT VARIOUS LOCATIONS FROM 0.2 MILE NORTH OF ROSECRANS AVENUE TO 0.1 MILE SOUTH OF ATLANTIC AVENUE UNDERCROSSING
Contractor Name: Landscaping Support Services
Contractor Address: 12610 Saticoy St., North Hollywood, CA 91605
Resident Engineer: Jose Ferrer Structure Rep.: Unknown
DIME Sample ID: 2023-08-15-50
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Production Start-Up
Type of Material: Asphalt Rubber Binder
Sample Taken Date: 08/15/2023
Date that the sample was received by the laboratory/organization performing the testing: 08/18/2023
The quantity of what the sample constitutes: 1 Quart Can
A brief description of the sample: Asphalt Rubber Binder
From where was the sample collected: Supplier
Laboratory sample identification: 0420-23
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan - Irwindale
Asphalt modifier supplier:
Performance Grade: PG 64-16
Lot number:
Sublot number:
Asphalt Rubber Binder Mix Number:
DIME Test ID: 2023-08-15-50-1
Test Method: ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)
Verified Date: 08/23/2023
Date Tested: 08/23/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Determination
|
Unworked Penetration
|
|
Unworked Penetration
|
42 0.1 mm
|
DIME Test ID: 2023-08-15-50-2
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 08/23/2023
Date Tested: 08/22/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
ASTM Thermometer used?
|
C
|
|
Softening Point Sample 1
|
58 C
|
|
Softening Point Sample 2
|
59 C
|
|
Bath Liquid
|
freshly boiled distilled water
|
|
Minutes Reaction
|
no data
|
DIME Test ID: 2023-08-15-50-3
Test Method: ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)
Verified Date: 08/23/2023
Date Tested: 08/23/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Temperature
|
25 C
|
|
Final Dial reading (F1)
|
79 mm
|
|
Ball Penetration (P1)
|
2 mm
|
|
Final Dial reading (F2)
|
80 mm
|
|
Ball Penetration (P2)
|
3 mm
|
|
Final Dial reading (F3)
|
81 mm
|
|
Ball Penetration (P3)
|
3 mm
|
|
Resilience 1
|
23 %
|
|
Resilience 2
|
23 %
|
|
Resilience 3
|
22 %
|
|
Average Resilience
|
23 %
|
|
Minutes Reaction
|
no data
|
