Gavin Newsom, Governor |
DEPARTMENT OF TRANSPORTATIONDIVISION OF ENGINEERING SERVICES MATERIALS ENGINEERING AND TESTING SERVICES Concrete Materials Testing Branch 5900 Folsom Blvd. Sacramento, CA 95819 916-227-7205 |
Contract # 042640U4 Cty SON Rte 101 PM 0.9/3.6 Vendor # |
REPORT OF LABORATORY TESTING |
||||
Resident Engineer: |
Richard Duncan |
Date Reported: |
04/01/2016 |
|
Address: |
TL Number: |
Unknown |
||
City: |
||||
Project Name: CONSTRUCT PETALUMA BLVD SOUTH INTERCHANGE, REPLACE PETALUMA RIVER BR |
||||
Prime Contractor: GHILOTTI - CC MYERS JV |
||||
Sample Taken Date: |
03/03/2016 |
Mix Design: |
4100A |
|
Contractor: Unknown |
Location: SONOMA COUNTY IN AND NEAR PETALUMA FROM GUNN DRIVE TO ROUTE 101/116 SEPARATION AND OVERHEAD |
|||
Structure unique identifier: 200295 |
||||
Structure name: Petaluma River Bridge |
||||
Location of Pour: Closure Daiphragms Piers 2 3 4 Int DiaSt 2 |
The following testing has been tested in accordance with:
ASTM C39-10 : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Specimen | Cross sectional area of cylinder (in^2) | Average diameter of cylinder (in) | Compressive strength of cylinder (psi) | Maximum load on cylinder (lb) | Type of fracture pattern of cylinder |
---|---|---|---|---|---|
1 | 27.81 | 5.95 | 3461.6 | 96268 | 1 |
2 | 27.9 | 5.96 | 3623.7 | 101100 | 1 |
DIME Test ID: 2016-03-03-3-1
Number of specimens: 2
Compressive strength (to nearest 10 psi): 3540
Age of specimen: 7 days
Certified By: Mike Mullins
ASTM C39-10 : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Specimen | Cross sectional area of cylinder (in^2) | Average diameter of cylinder (in) | Compressive strength of cylinder (psi) | Maximum load on cylinder (lb) | Type of fracture pattern of cylinder |
---|---|---|---|---|---|
1 | 27.99 | 5.97 | 4447.6 | 124488 | 1 |
2 | 28.09 | 5.98 | 4585.0 | 128794 | 1 |
DIME Test ID: 2016-03-03-3-2
Number of specimens: 2
Compressive strength (to nearest 10 psi): 4520
Age of specimen: 11 days
Certified By: Mike Mullins
ASTM C39-10 : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Specimen | Cross sectional area of cylinder (in^2) | Average diameter of cylinder (in) | Compressive strength of cylinder (psi) | Maximum load on cylinder (lb) | Type of fracture pattern of cylinder |
---|---|---|---|---|---|
1 | 27.99 | 5.97 | 5934.2 | 166099 | 1 |
2 | 27.99 | 5.97 | 5886.6 | 164767 | 1 |
DIME Test ID: 2016-03-03-3-3
Number of specimens: 2
Compressive strength (to nearest 10 psi): 5910
Age of specimen: 29 days
Certified By: Bang Nguyen
*Subject to final inspection by the Resident Engineer. |
TL- Report of Laboratory Testing