Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 215157 DEA: 021H5704 EFIS: 0216000036
QA Service Level: 1
DIST-CO-RTE-PM: 02-SHA-299-67.8/77.8
Work Description: BURNEY CAPM - PAVEMENT REHABILITATION
Location Description: BUNCH GRASS LOOKOUT RD TO NAPA LN
Contractor Name: JF Shea Constrcution
Contractor Address: 17400 Clear Creek Road, Redding, CA 96001
Resident Engineer: Kyle Higgins Structure Rep.: Unknown
DIME Sample ID: 2023-08-01-73
TL Number from the TL Form: 823604
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Verification
Type of Material: Asphalt Rubber Binder
Sample Taken Date: 08/01/2023
Date that the sample was received by the laboratory/organization performing the testing: 08/18/2023
The quantity of what the sample constitutes: 2 OF 2 CANS
A brief description of the sample: PG 64-16
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Albina Asphalt - Klamath FAlls, OR
Asphalt modifier supplier:
Performance Grade: PG 64-16
Lot number:
Sublot number:
Asphalt Rubber Binder Mix Number:
DIME Test ID: 2023-08-01-73-2
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 08/29/2023
Date Tested: 08/25/2023
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
ASTM Thermometer used?
|
C
|
|
Softening Point Sample 1
|
69 C
|
|
Softening Point Sample 2
|
69 C
|
|
Bath Liquid
|
freshly boiled distilled water
|
|
Minutes Reaction
|
no data
|
DIME Test ID: 2023-08-01-73-3
Test Method: ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)
Verified Date: 08/29/2023
Date Tested: 08/24/2023
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Temperature
|
25 C
|
|
Final Dial reading (F1)
|
84 mm
|
|
Ball Penetration (P1)
|
6 mm
|
|
Final Dial reading (F2)
|
80 mm
|
|
Ball Penetration (P2)
|
5 mm
|
|
Final Dial reading (F3)
|
84 mm
|
|
Ball Penetration (P3)
|
8 mm
|
|
Resilience 1
|
22 %
|
|
Resilience 2
|
25 %
|
|
Resilience 3
|
24 %
|
|
Average Resilience
|
24 %
|
|
Minutes Reaction
|
no data
|
