Print Report | Back to Sample Detail

Sample Record for 2023-08-15-34

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993806 DEA: 07330504 EFIS: 0716000214 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-710-R15.1/21.9
Work Description: INSTALL HIGHWAY PLANTING AND PLACE MINOR CONCRETE.
Location Description: LOS ANGELES COUNTY AT VARIOUS LOCATIONS FROM 0.2 MILE NORTH OF ROSECRANS AVENUE TO 0.1 MILE SOUTH OF ATLANTIC AVENUE UNDERCROSSING
Contractor Name: Landscaping Support Services
Contractor Address: 12610 Saticoy St., North Hollywood, CA 91605
Resident Engineer: Jose Ferrer Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-08-15-34
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Production Start-Up
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/15/2023
Date that the sample was received by the laboratory/organization performing the testing: 08/18/2023
The quantity of what the sample constitutes: 20 BOXES OF RHMA
A brief description of the sample: 3/4" RHMA-G SP 0.5% LAS
From where was the sample collected: Manufacturer
Laboratory sample identification: 0420G-23
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Irwindale

Material Information

HMA Type: RHMA-G
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number: 226108M IRW LTR
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2023-08-15-34-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/06/2023
Date Tested: 08/22/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 2112.9 g
Corrected Asphalt Binder Content 7.75 %
Mass Loss 175.4 g
Correction Factor (Percent by mass of HMA Specimen) 0.41 %
Moisture Content 0.00 %
Temperature Compensation Factor 0.00 %
Test Temperature 538 C

Test 2 of 4

DIME Test ID: 2023-08-15-34-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 09/06/2023
Date Tested: 08/22/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 7329.9 grams
Mass of oven-dry sample in air for Sample 1 2562.2 grams
Mass of container filled with the sample and water for Sample 1 8832.7 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.419
Theoretical maximum density at 25°C (77°F) 2412.0 kg/m^3

Test 3 of 4

DIME Test ID: 2023-08-15-34-3
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 09/06/2023
Date Tested: 08/23/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Percent Air Voids 2.7 %
Percent Air Voids 2 2.8 %
Percent Air Voids 3 2.7 %
Percent Air Voids Average 2.7 %

Test 4 of 4

DIME Test ID: 2023-08-15-34-4
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 09/06/2023
Date Tested: 08/23/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Bulk Specific Gravity 2.354
Bulk Specific Gravity 2 2.352
Bulk Specific Gravity 3 2.354
Average Bulk Specific Gravity 2.353