Print Report | Back to Sample Detail

Sample Record for 2023-08-14-47

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993647 DEA: 081K0504 EFIS: 0818000173 QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV,SBD-62-84.9/90.2,90.2/94.0
Work Description: RHMA-G, PARTIAL DEPTH RECYCLING AND RECYCLING AGENT.
Location Description: RIVERSIDE AND SAN BERNADINO COUNTIES NEAR VIDAL JUNCTION FROM ROUTE 177 TO 1.7 MILES EAST OF IRON MOUNTAIN PUMPING PLANT ROAD
Contractor Name: CALMEX ENGINEERING, INC.
Contractor Address: 2750 S. LILAC AVE, BLOOMINGTON CA 92316
Resident Engineer: Francisco Montellano Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-08-14-47
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/14/2023
Date that the sample was received by the laboratory/organization performing the testing: 08/17/2023
The quantity of what the sample constitutes: 3 BOXES OF RHMA
A brief description of the sample: 1/2" RHMA-G-SP 0.3% EVO
From where was the sample collected: Manufacturer
Laboratory sample identification: 0415G-23
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Martin Murrieta Coachella

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number:
Sublot number:
HMA Mix Number: 41218080

Test Results

Test 1 of 1

DIME Test ID: 2023-08-14-47-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/19/2023
Date Tested: 08/18/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of HMA Sample prior to ignition 1634.2 g
Corrected Asphalt Binder Content 7.79 %
Mass Loss 128.6 g
Correction Factor (Percent by mass of HMA Specimen) -0.10 %
Moisture Content 0.00 %
Temperature Compensation Factor 0.18 %
Test Temperature 538 C