Print Report | Back to Sample Detail

Sample Record for 2023-06-26-78

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 44444 DEA: ASCP EFIS: ASCP QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for Asphalt Supplier Certification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-06-26-78
TL Number from the TL Form:
Sample Submitted By Organization: Granite Construction Company - Bakersfield
Sample Organization Contact: (775) 690-7424
Type of Sample: Verification
Type of Material: Asphalt Binder
Sample Taken Date: 06/26/2023
Date that the sample was received by the laboratory/organization performing the testing: 06/26/2023
The quantity of what the sample constitutes: 1 of 1
A brief description of the sample: Tank 5901
From where was the sample collected: Manufacturer
Laboratory sample identification: 62620235901
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Bakersfield, CA

Material Information

Performance Grade: PG 70-10
Modified:
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Certified Asphalt Supplier: Centennial Asphalt
Multigrade:
Multigrade Type:
Asphalt Binder Mix Number:

Test Results

Test 1 of 8

DIME Test ID: 2023-06-26-78-1
Test Method: AASHTO T316-17: Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
Verified Date: 07/19/2023
Date Tested: 07/19/2023
Submitted By Organization: Granite Construction Company - Bakersfield
Organization Address: 1201 China Grade Loop,
Organization City: Bakersfiled
Organization State: CA
Organization Zipcode: 93308
Organization Email: edgard.hitti@gcinc.com
Organization Phone: (775) 690-7424
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
Is viscosity reading in cP/Pa-s? Pa-s
Time of test no data HH:MM
Test Temperature 0 C
Speed 0 rpm
Spindle size no data in
Torque 0 %
Viscosity reading #1 (A) no data
Viscosity reading #2 (B) no data
Viscosity reading #3 (C) no data
Average viscosity 0.477 Pa-s

Test 2 of 8

DIME Test ID: 2023-06-26-78-2
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 07/19/2023
Date Tested: 07/19/2023
Submitted By Organization: Granite Construction Company - Bakersfield
Organization Address: 1201 China Grade Loop,
Organization City: Bakersfiled
Organization State: CA
Organization Zipcode: 93308
Organization Email: edgard.hitti@gcinc.com
Organization Phone: (775) 690-7424
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
Phase Original binder
Phase Angle (δ) (for the 10 cycles) no data
Dynamic Shear, G*/sin(δ) 1.12 kPa

Test 3 of 8

DIME Test ID: 2023-06-26-78-3
Test Method: AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
Verified Date: 07/19/2023
Date Tested: 07/19/2023
Submitted By Organization: Granite Construction Company - Bakersfield
Organization Address: 1201 China Grade Loop,
Organization City: Bakersfiled
Organization State: CA
Organization Zipcode: 93308
Organization Email: edgard.hitti@gcinc.com
Organization Phone: (775) 690-7424
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
Is mass change based on one or two containers? One
Average mass change -0.477 percent

Test 4 of 8

DIME Test ID: 2023-06-26-78-4
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 07/19/2023
Date Tested: 07/19/2023
Submitted By Organization: Granite Construction Company - Bakersfield
Organization Address: 1201 China Grade Loop,
Organization City: Bakersfiled
Organization State: CA
Organization Zipcode: 93308
Organization Email: edgard.hitti@gcinc.com
Organization Phone: (775) 690-7424
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
Phase RTFO residue
Phase Angle (δ) (for the 10 cycles) no data
Dynamic Shear, G*/sin(δ) 2.71 kPa

Test 5 of 8

DIME Test ID: 2023-06-26-78-5
Test Method: AASHTO T51-22: Standard Method of Test for Ductility of Asphalt Materials (Asphalt Binder)
Verified Date: 07/19/2023
Date Tested: 07/19/2023
Submitted By Organization: Granite Construction Company - Bakersfield
Organization Address: 1201 China Grade Loop,
Organization City: Bakersfiled
Organization State: CA
Organization Zipcode: 93308
Organization Email: edgard.hitti@gcinc.com
Organization Phone: (775) 690-7424
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
Is a normal test obtainable? Yes
Number of replicates tested One
Ductility of test #1 (D1) no data
Ductility of sample 100 cm

Test 6 of 8

DIME Test ID: 2023-06-26-78-6
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 07/19/2023
Date Tested: 07/19/2023
Submitted By Organization: Granite Construction Company - Bakersfield
Organization Address: 1201 China Grade Loop,
Organization City: Bakersfiled
Organization State: CA
Organization Zipcode: 93308
Organization Email: edgard.hitti@gcinc.com
Organization Phone: (775) 690-7424
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
Phase PAV residue
Test Plate Diameter no data
Phase Angle (δ) (for the 10 cycles) no data
(G*) x sin(δ)= 2934 kPa

Test 7 of 8

DIME Test ID: 2023-06-26-78-7
Test Method: AASHTO T313-22: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Verified Date: 07/19/2023
Date Tested: 07/19/2023
Submitted By Organization: Granite Construction Company - Bakersfield
Organization Address: 1201 China Grade Loop,
Organization City: Bakersfiled
Organization State: CA
Organization Zipcode: 93308
Organization Email: edgard.hitti@gcinc.com
Organization Phone: (775) 690-7424
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
Time test started no data
Flags issued by software during test no data
Correlation coefficient (R²) 0
Regression coefficient a no data
Regression coefficient b no data
Regression coefficient c no data
Load at time 0.0 0.0 mN
Deflection at time 0.0 s 0.000 µm
Load at time 0.5 s 0.0 mN
Deflection at time 0.5 s 0.000 µm
Load at 60.0 s 0.0 mN
Beam deflection 60.0 s 0.000 µm
Measured Stiffness Modulus 60.0 s no data
Estimated Stiffness Modulus 60.0 s 101.000 mPa
Difference between stiffness moduli 60.0 s no data
Estimated m-value 60.0 s no data

Test 8 of 8

DIME Test ID: 2023-06-26-78-8
Test Method: AASHTO T313-22: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Verified Date: 07/19/2023
Date Tested: 07/19/2023
Submitted By Organization: Granite Construction Company - Bakersfield
Organization Address: 1201 China Grade Loop,
Organization City: Bakersfiled
Organization State: CA
Organization Zipcode: 93308
Organization Email: edgard.hitti@gcinc.com
Organization Phone: (775) 690-7424
General Comments for this Test: Submitted from ASCP bulk upload.
Test Result Compliance:
Additional Comments When Verified:
Time test started no data
Flags issued by software during test no data
Correlation coefficient (R²) 0
Regression coefficient a no data
Regression coefficient b no data
Regression coefficient c no data
Load at time 0.0 0.0 mN
Deflection at time 0.0 s 0.000 µm
Load at time 0.5 s 0.0 mN
Deflection at time 0.5 s 0.000 µm
Load at 60.0 s 0.0 mN
Beam deflection 60.0 s 0.000 µm
Measured Stiffness Modulus 60.0 s no data
Estimated Stiffness Modulus 60.0 s no data
Difference between stiffness moduli 60.0 s no data
Estimated m-value 60.0 s 0.397