Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 7285 DEA: 040120T4 EFIS: 0400000027
QA Service Level: 1
DIST-CO-RTE-PM: 04-SF-80-12.6/13.9
Work Description: CONSTRUCT BRIDGE, ROADWAYS, ELECTRICAL, BUILDINGS AND REMOVE BRIDGES
Location Description: THE CITY AND COUNTY OF SAN FRANCISCO FROM THE YERBA BUENA TUNNEL TO 1.3 KM EAST OF THE YERBA BUENA TUNNEL
Contractor Name: CALIFORNIA ENGINEERING CONTRACTORS, INC.
Contractor Address: 20 HAPPY VALLEY ROAD, PLEASANTON, CA 94566
Resident Engineer: Tom Larwin Structure Rep.: Mehran Ardakanian
DIME Sample ID: 2015-12-29-4
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM6 - Steel Check Sample Plate
Sample Taken Date: 12/29/2015
Date that the sample was received by the laboratory/organization performing the testing: 12/29/2015
The quantity of what the sample constitutes: 2
A brief description of the sample: Flat Bar
From where was the sample collected: Job Site
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kyungin Industries
Heat Number(s): 416820 , 141231
Material Specification: A36
Grade: 36
Thickness: 4.5mm 3mm
Shape: Flat Bar
Metal Foundry Manufacturer (Mill): Korea Steel Sangwon Steel
Plate Dimension: 25mm x 12in
DIME Test ID: 2015-12-29-4-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Flat Sample)
Verified Date: 01/07/2016
Date Tested: 01/05/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Width (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Total Elongation (%) | Tested By | | 141231 | 0.505 | 0.0571 | 51553 | 72715 | 31.3 | Fred | | 416820 | 0.505 | 0.0864 | 49324 | 65035 | 37.2 | Fred |
| |
|
UTM
|
67KIP
|
|
Temperature
|
72 F
|
