Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994436 DEA: 11080284 EFIS: 1117000085
QA Service Level: 1
DIST-CO-RTE-PM: 11-IMP-98-32.1/32.5
Work Description: Place HMA, minor concrete, modify drainage, landscape and electrical.
Location Description: IMPERIAL COUNTY IN CALEXICO FROM OLLIE AVENUE TO 0.1 MILE EAST OF ROCKWOOD AVENUE
Contractor Name: Ral Investment Corporation
Contractor Address: 10065 Old Grove Rd Ste 200, San Diego, CA, 92131-1664
Resident Engineer: Daniel HERNANDEZ DUARTE Structure Rep.: Unknown
DIME Sample ID: 2023-06-14-79
TL Number from the TL Form:
Sample Submitted By Organization: CT D11 - District 11 Materials Laboratory
Sample Organization Contact: (858) 688-1570
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/14/2023
Date that the sample was received by the laboratory/organization performing the testing: 06/16/2023
The quantity of what the sample constitutes: 4 boxes 5 bags
A brief description of the sample: 1-1/2" HMA
From where was the sample collected: Supplier
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: API Gateway
DIME Test ID: 2023-06-14-79-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/10/2023
Date Tested: 07/28/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used?
|
Fahrenheit
|
Test procedure used?
|
Method A
|
Mass of the specimen basket assembly
|
4014.8 g
|
Mass of the specimen and specimen basket assembly prior to ignition
|
8048.4 g
|
Mass of HMA Sample prior to ignition
|
4033.6 g
|
Corrected Asphalt Binder Content
|
3.87 %
|
Mass Loss
|
149.6 g
|
Mass of aggregate remaining after ignition
|
3884.0 g
|
Correction Factor (Percent by mass of HMA Specimen)
|
-0.16 %
|
Moisture Content
|
0.00 %
|
Temperature Compensation Factor
|
0.00 %
|
Test Temperature
|
538 F
|
DIME Test ID: 2023-06-14-79-2
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/10/2023
Date Tested: 07/21/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of Samples
|
1
|
What is the unit of measurement for theoretical density?
|
US Units
|
Mass Determination
|
Air
|
Method Performed
|
Mechanical Agitation - Method A
|
Mass of container filled with water 1
|
10199.0 grams
|
Mass of oven-dry sample in air for Sample 1
|
4056.6 grams
|
Mass of container filled with the sample and water for Sample 1
|
12656.0 grams
|
Temperature of Water
|
77 °F
|
Specific Gravity for Sample 1
|
2.536
|
Theoretical maximum density at 25°C (77°F)
|
157.9 lb/ft^3
|
DIME Test ID: 2023-06-14-79-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/10/2023
Date Tested: 07/26/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity
|
2.420
|
Bulk Specific Gravity 2
|
2.419
|
Bulk Specific Gravity 3
|
2.418
|
Average Bulk Specific Gravity
|
2.419
|
DIME Test ID: 2023-06-14-79-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 08/10/2023
Date Tested: 08/10/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Percent Air Voids
|
4.6 %
|
Percent Air Voids 2
|
4.6 %
|
Percent Air Voids 3
|
4.7 %
|
Percent Air Voids Average
|
4.6 %
|
DIME Test ID: 2023-06-14-79-5
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 08/10/2023
Date Tested: 08/10/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Unit system used?
|
SI Units
|
Average Dry Tensile Strength
|
187 psi
|
Average Wet Tensile Strength
|
131 psi
|
Tensile Strength Ratio
|
0.7
|