Print Report | Back to Sample Detail

Sample Record for 2023-06-14-77

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994436 DEA: 11080284 EFIS: 1117000085 QA Service Level: 1
DIST-CO-RTE-PM: 11-IMP-98-32.1/32.5
Work Description: Place HMA, minor concrete, modify drainage, landscape and electrical.
Location Description: IMPERIAL COUNTY IN CALEXICO FROM OLLIE AVENUE TO 0.1 MILE EAST OF ROCKWOOD AVENUE
Contractor Name: Ral Investment Corporation
Contractor Address: 10065 Old Grove Rd Ste 200, San Diego, CA, 92131-1664
Resident Engineer: Daniel HERNANDEZ DUARTE Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-06-14-77
TL Number from the TL Form:
Sample Submitted By Organization: CT D11 - District 11 Materials Laboratory
Sample Organization Contact: (858) 688-1570
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/14/2023
Date that the sample was received by the laboratory/organization performing the testing: 06/16/2023
The quantity of what the sample constitutes: 16 boxes 11 bags
A brief description of the sample: 1-1/2" HMA
From where was the sample collected: Supplier
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: API Gateway

Material Information

HMA Type: Type A HMA
HMA Grading: Not Applicable
Lot number:
Sublot number:
HMA Mix Number:
Test results on following page(s): 7

Test Results

Test 1 of 7

DIME Test ID: 2023-06-14-77-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/09/2023
Date Tested: 07/05/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of the specimen basket assembly 4024.4 g
Mass of the specimen and specimen basket assembly prior to ignition 8085.5 g
Mass of HMA Sample prior to ignition 4061.1 g
Corrected Asphalt Binder Content 4.06 %
Mass Loss 158.3 g
Mass of aggregate remaining after ignition 3902.8 g
Correction Factor (Percent by mass of HMA Specimen) -0.16 %
Moisture Content 0.00 %
Temperature Compensation Factor 0.00 %
Test Temperature 538 F

Test 2 of 7

DIME Test ID: 2023-06-14-77-2
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/09/2023
Date Tested: 07/06/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of Samples 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Air
Method Performed no data
Mass of container filled with water 1 10199.0 grams
Mass of oven-dry sample in air for Sample 1 4034.0 grams
Mass of container filled with the sample and water for Sample 1 12612.8 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.490
Theoretical maximum density at 25°C (77°F) 155.0 lb/ft^3

Test 3 of 7

DIME Test ID: 2023-06-14-77-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/09/2023
Date Tested: 07/05/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity 2.398
Bulk Specific Gravity 2 2.401
Bulk Specific Gravity 3 2.397
Average Bulk Specific Gravity 2.399

Test 4 of 7

DIME Test ID: 2023-06-14-77-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 08/09/2023
Date Tested: 07/05/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Percent Air Voids 3.7 %
Percent Air Voids 2 3.6 %
Percent Air Voids 3 3.7 %
Percent Air Voids Average 3.7 %

Test 5 of 7

DIME Test ID: 2023-06-14-77-5
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 08/09/2023
Date Tested: 07/12/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Unit system used? SI Units
Average Dry Tensile Strength 175 psi
Average Wet Tensile Strength 139 psi
Tensile Strength Ratio 0.79

Test 6 of 7

DIME Test ID: 2023-06-14-77-7
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Verified Date: 08/09/2023
Date Tested: 07/27/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Test Temperature 131 F
Type and Amount of Anti-Stripping Additive 1.0%
Stripping Inflection Point (Wheel A) >20000
Stripping Inflection Point (Wheel B) >12500
Maximum impression at 5000 passes (left wheel) 1.15 mm
Maximum impression at 5000 passes (right wheel) 0.9 mm
Average impression at 5000 passes (left/right avg) 1.02 mm
Maximum impression at 10000 passes (left wheel) 1.4 mm
Maximum impression at 10000 passes (right wheel) 0.96 mm
Average impression at 10000 passes (left/right avg) 1.18 mm
Maximum impression at 15000 passes (left wheel) 1.53 mm
Maximum impression at 15000 passes (right wheel) 1.04 mm
Average impression at 15000 passes (left/right avg) 1.29 mm
Maximum impression at 20000 passes (left wheel) 1.58 mm
Maximum impression at 20000 passes (right wheel) 1.12 mm
Average impression at 20000 passes (left/right avg) 1.35 mm
Average impression at 25000 passes (left/right avg) no data

Test 7 of 7

DIME Test ID: 2023-06-14-77-8
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/09/2023
Date Tested: 07/25/2023
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test: AC Cores
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity 2.352
Bulk Specific Gravity 2 2.379
Average Bulk Specific Gravity 2.366