Print Report | Back to Sample Detail

Sample Record for 2023-06-08-54

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1242 DEA: 033M8404 EFIS: 0300000604 QA Service Level: 1
DIST-CO-RTE-PM: 03-YOL-80-0.0/4.4
Work Description: RAC OVERLAY (TYPE O)
Location Description: YOLO COUNTY IN AND NEAR THE CITY OF DAVIS FROM THE SOLANO COUNTY LINE TO 1.4 MILES WEST OF THE YOLO CAUSEWAY
Contractor Name: A. TEICHERT & SON, INC. DBA TEICHERT CONSTRUCTION
Contractor Address: P.O. BOX 1890, DAVIS, CA 95616-1890
Resident Engineer: PRESTON TRI Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-06-08-54
TL Number from the TL Form: C726061
Sample Submitted By Organization: CT D04 - Concord Field Laboratory
Sample Organization Contact: (510) 714-7019
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/08/2023
Date that the sample was received by the laboratory/organization performing the testing: 06/09/2023
The quantity of what the sample constitutes: 2 boxes
A brief description of the sample: Hot mix asphalt in boxes
From where was the sample collected: Manufacturer
Laboratory sample identification: Con_23_725
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Bradshaw Plant

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 19
HMA Mix Number: 1635V
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2023-06-08-54-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 06/26/2023
Date Tested: 06/14/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test: Lot 1 SL 19
Test Result Compliance: complies
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 7371.8 grams
Mass of oven-dry sample in air for Sample 1 2614.2 grams
Mass of container filled with the sample and water for Sample 1 8970.7 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.575
Theoretical maximum density at 25°C (77°F) 2567.5 kg/m^3