Print Report | Back to Sample Detail

Sample Record for 2023-06-19-30

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994400 DEA: 09378904 EFIS: 0919000003 QA Service Level: 1
DIST-CO-RTE-PM: 09-KER-14-46.2/52.8
Work Description: RHMA PLACED OVER PARTIAL DEPTH RECYCLING.
Location Description: KERN COUNTY NEAR ARMISTEAD FROM 1.1 MILES NORTH OF REDROCK CANYON ROAD TO 3.5 MILES SOUTH OF FREEMAN GULCH BRIDGE
Contractor Name: STATEWIDE TRAFFIC SIGN AND SAFETY
Contractor Address: 4400 State Road, Bakersfield, CA 93308
Resident Engineer: Damon Cherenzia Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-06-19-30
TL Number from the TL Form:
Sample Submitted By Organization: CT D09 - Bishop Field Laboratory
Sample Organization Contact: (760) 872-5211
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/19/2023
Date that the sample was received by the laboratory/organization performing the testing: 06/26/2023
The quantity of what the sample constitutes: 1 box
A brief description of the sample: RHMA
From where was the sample collected: Source
Laboratory sample identification: RHMA-9
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Griffith Edmonston-Lebec

Material Information

HMA Type: RHMA-G
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2023-06-19-30-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 06/28/2023
Date Tested: 06/27/2023
Submitted By Organization: CT D09 - Bishop Field Laboratory
Organization Address: 500 South Main Street,
Organization City: Bishop
Organization State: CA
Organization Zipcode: 93514
Organization Email: chris.talbot@dot.ca.gov
Organization Phone: (760) 872-0794
General Comments for this Test: RHMA-09
Test Result Compliance: complies
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 7310.5 grams
Mass of oven-dry sample in air for Sample 1 2080.4 grams
Mass of container filled with the sample and water for Sample 1 8550.2 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.475
Theoretical maximum density at 25°C (77°F) 154.1 lb/ft^3

Test 2 of 2

DIME Test ID: 2023-06-19-30-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 06/28/2023
Date Tested: 06/28/2023
Submitted By Organization: CT D09 - Bishop Field Laboratory
Organization Address: 500 South Main Street,
Organization City: Bishop
Organization State: CA
Organization Zipcode: 93514
Organization Email: chris.talbot@dot.ca.gov
Organization Phone: (760) 872-0794
General Comments for this Test: RHMA-09
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 4248.6 g
Mass of the specimen and specimen basket assembly prior to ignition 6286.7 g
Mass of HMA Sample prior to ignition 2038.1 g
Corrected Asphalt Binder Content 7.55 %
Mass Loss 157 g
Mass of aggregate remaining after ignition 1881.1 g
Correction Factor (Percent by mass of HMA Specimen) 0.15 %
Moisture Content no data0 %
Temperature Compensation Factor no data0 %
Test Temperature 538 C