Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 214437 DEA: 07323104 EFIS: 0716000061
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-210-R36.0/R40.6
Work Description: PSR-TMDL
Location Description: LOS ANGELES COUNTY IN IRWINDALE AND AZUSA FROM 0.1 MILE EAST HIGHLAND AVENUE UNDERCROSSING TO SOUTH CITRUS AVENUE OVERCROSSING
Contractor Name: Ortiz Enterprises
Contractor Address: 6 Cushing, Suite 200, Irvine , CA 92618
Resident Engineer: Hai Hong Structure Rep.: Unknown
DIME Sample ID: 2023-06-01-75
TL Number from the TL Form: 924530A
Sample Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Sample Organization Contact: (213) 817-0387
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/01/2023
Date that the sample was received by the laboratory/organization performing the testing: 06/15/2023
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 3/4" HMA-A 220831A IRW LTR
From where was the sample collected: Manufacturer
Laboratory sample identification: 23-194
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Materials Irwindale
DIME Test ID: 2023-06-01-75-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 06/19/2023
Date Tested: 06/19/2023
Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Organization Address: 1940 South Workman Mill Road,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90601
Organization Email: chad.chotibhongs@dot.ca.gov
Organization Phone: (213) 817-0387
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of Samples
|
1
|
What is the unit of measurement for theoretical density?
|
US Units
|
Mass Determination
|
Air
|
Method Performed
|
Mechanical Agitation - Method A
|
Mass of container filled with water 1
|
7359.3 grams
|
Mass of oven-dry sample in air for Sample 1
|
2519.2 grams
|
Mass of container filled with the sample and water for Sample 1
|
8881.0 grams
|
Temperature of Water
|
0 °F
|
Specific Gravity for Sample 1
|
2.526
|
Theoretical maximum density at 25°C (77°F)
|
157.2 lb/ft^3
|
DIME Test ID: 2023-06-01-75-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 06/19/2023
Date Tested: 06/19/2023
Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Organization Address: 1940 South Workman Mill Road,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90601
Organization Email: chad.chotibhongs@dot.ca.gov
Organization Phone: (213) 817-0387
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used?
|
Celsius
|
Test procedure used?
|
Method A
|
Mass of the specimen basket assembly
|
4027.1 g
|
Mass of the specimen and specimen basket assembly prior to ignition
|
6099.9 g
|
Mass of HMA Sample prior to ignition
|
2072.8 g
|
Corrected Asphalt Binder Content
|
4.37 %
|
Mass Loss
|
101.4 g
|
Mass of aggregate remaining after ignition
|
1971.4 g
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.52 %
|
Moisture Content
|
0.00 %
|
Temperature Compensation Factor
|
0.00 %
|
Test Temperature
|
538 C
|