Sample Record for 2023-06-16-25
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 215349 DEA: 081C0824 EFIS: 0816000087
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-10-R104.9/R134.2
Work Description: PLACE HMA (TYPE A), JPCP AND IMPORTED BORROW.
Location Description: RIVERSIDE COUNTY FROM ROUTE 10/177 SEPARATION TO 1.1 MILES WEST OF WILEY'S WELL RD OC
Contractor Name: FISHER SAND & GRAVEL CO.
Contractor Address: 1302 W DRIVERS WAY, TEMPE, AZ. 85284
Resident Engineer: Khoi Vu Structure Rep.: Shukri Abouazra
Sample Information
DIME Sample ID: 2023-06-16-25
TL Number from the TL Form: 161
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Quality Assurance
Type of Material: Concrete
Sample Taken Date: 06/16/2023
Date that the sample was received by the laboratory/organization performing the testing: 06/17/2023
The quantity of what the sample constitutes: 3
A brief description of the sample: 6x12
From where was the sample collected: Job Site
Laboratory sample identification: 1041-161A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Fisher Industries
Material Information
The concrete mix design number: 2102-OPT1
The truck number from where the sample was collected: 69
The batch plant ticket number from where the sample was collected: Not Provided on TL
Concrete batch plant: FISHER
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: RTE 10 177 SEPARATION TO WILEY WELLS RD STA 589000
Where the material sample would have been placed if not sampled:
From Lot No.:
Bag Lot No.:
Test Results
Test 1 of 1
DIME Test ID: 2023-06-16-25-1
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617 - Sulfur Mortar Cap
Verified Date: 07/28/2023
Date Tested: 07/28/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used?
|
US Units
|
Number of specimens
|
3
|
Test performed
|
With no density determined
|
Cross sectional area of cylinder 1
|
28.65 in^2
|
Cross sectional area of cylinder 2
|
28.65 in^2
|
Cross sectional area of cylinder 3
|
28.65 in^2
|
Capped in accordance with?
|
ASTM C617 - Sulfur Mortar Cap
|
Compressive strength (to nearest 10 psi)
|
4920 psi
|
Average diameter of cylinder 1
|
6.04 in
|
Average diameter of cylinder 2
|
6.04 in
|
Compressive strength of cylinder 1
|
4918.3 psi
|
Compressive strength of cylinder 2
|
4951.8 psi
|
Average diameter of cylinder 3
|
6.04 in
|
Compressive strength of cylinder 3
|
4878.9 psi
|
Maximum load on cylinder 1
|
140910 lb
|
Maximum load on cylinder 2
|
141870 lb
|
Maximum load on cylinder 3
|
139780 lb
|
Type of fracture pattern of cylinder 1
|
2
|
Type of fracture pattern of cylinder 2
|
3
|
Type of fracture pattern of cylinder 3
|
3
|
Comment on any defect in either specimen or caps (Max 250 Characters)
|
no data
|
Correction factor for cylinder 1
|
1
|
Correction factor for cylinder 2
|
1
|
Correction factor for cylinder 3
|
1
|
Age of specimen
|
42 days
|