Print Report | Back to Sample Detail

Sample Record for 2023-05-23-58

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994387 DEA: 023J7704 EFIS: 0222000082 QA Service Level: 1
DIST-CO-RTE-PM: 02-SIS-96-97.2/103.0
Work Description: RHMA OVERLAY, REPLACE AC SURFACING, GUARDRAIL AND TRAFFIC STRIPE.
Location Description: SISKIYOU COUNTY ABOUT 21 MILES EAST OF HORSE CREEK FROM 4.2 MILES EAST OF EMPIRE CREEK BRIDGE TO 0.4 MILE WEST OF ROUTE 263
Contractor Name: TULLIS INC.
Contractor Address: Unknown
Resident Engineer: Nicholas Riddle Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-05-23-58
TL Number from the TL Form: TL 079248
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Rubber Binder
Sample Taken Date: 05/23/2023
Date that the sample was received by the laboratory/organization performing the testing: 06/07/2023
The quantity of what the sample constitutes: 2 of 2 cans
A brief description of the sample: PG 64-16 RHMA
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Tullis Inc. - Northstate Asphalt (Redding CA)

Material Information

Asphalt modifier supplier: Valero Benicia
Performance Grade: PG 64-16
Lot number:
Sublot number:
Asphalt Rubber Binder Mix Number:
Test results on following page(s): 3

Test Results

Test 1 of 3

DIME Test ID: 2023-05-23-58-1
Test Method: ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)
Verified Date: 06/12/2023
Date Tested: 06/12/2023
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Determination Unworked Penetration
Unworked Penetration 40 0.1 mm

Test 2 of 3

DIME Test ID: 2023-05-23-58-2
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 06/12/2023
Date Tested: 06/12/2023
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
ASTM Thermometer used? C
Softening Point Sample 1 67 C
Softening Point Sample 2 68 C
Bath Liquid freshly boiled distilled water
Minutes Reaction no data

Test 3 of 3

DIME Test ID: 2023-05-23-58-3
Test Method: ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)
Verified Date: 06/12/2023
Date Tested: 06/12/2023
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Temperature 25 C
Final Dial reading (F1) 76 mm
Ball Penetration (P1) 4 mm
Final Dial reading (F2) 70 mm
Ball Penetration (P2) 1 mm
Final Dial reading (F3) 76 mm
Ball Penetration (P3) 5 mm
Resilience 1 28 %
Resilience 2 31 %
Resilience 3 29 %
Average Resilience 29 %
Minutes Reaction no data