Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 215421 DEA: 042K9504 EFIS: 0417000057
QA Service Level: 1
DIST-CO-RTE-PM: 04-ALA-580-14.4/14.4
Work Description: CONSTRUCT MATERIAL TESTING LABORATORY BUILDING.
Location Description: ALAMEDA COUNTY IN LIVERMORE AT 2201 KITTY HAWK ROAD
Contractor Name: Walsh Construction Company II, LLC (Walsh) - Dominic Fung
Contractor Address: 1390 Willow Pass Road Suite 950, Concord, CA 94520
Resident Engineer: Amir-Fardin Sadeghi-Nedjad Structure Rep.: John Parecadan
DIME Sample ID: 2023-05-25-6
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Acceptance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 05/25/2023
Date that the sample was received by the laboratory/organization performing the testing: 05/31/2023
The quantity of what the sample constitutes: 160
A brief description of the sample: F1554 Gr 36 Anchor bolt
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: LB Construction
Rocap Number(s): NA
Heat Number(s): 120203597961
Nut Mfg. Lot Number(s): na
Washer Mfg. Lot Number(s): na
Bolt Specification: F1554 Gr 36
Bolt Length(s): 19"
Nut Specification: na
Washer Specification: na
Finish: Plain
Diameter/Size: 7/8"
Bolt Mfg. Lot Number: No Lot Number
Rocap Test Requirement(s): no
Lubricant Requirements(s): no
DIME Test ID: 2023-05-25-6-1
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 06/15/2023
Date Tested: 06/08/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | 1 | 120203597961 | 0.499 | 0.196 | 48159 | 71346 | 30.6 | aauvinen |
| |
UTM
|
67kip
|
Temperature
|
72 f
|
DIME Test ID: 2023-05-25-6-2
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 06/15/2023
Date Tested: 06/08/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | 2 | 120203597961 | 0.501 | 0.197 | 48561 | 71538 | 32.7 | aauvinen |
| |
UTM
|
67kip
|
Temperature
|
72 f
|
DIME Test ID: 2023-05-25-6-3
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 06/15/2023
Date Tested: 06/15/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
no data
|
Heat Number(s)
|
120203597961
|
Mfg. Lot Number
|
no data
|
Finish Coating
|
Plain
|
Product Markings
|
BLUE
|
Size
|
0.875 in
|
Bolt Length
|
19 in
|
Pitch Diameter
|
.788 in
|
Pitch Diameter 2nd
|
.788 in
|
DIME Test ID: 2023-05-25-6-4
Test Method: ASME B1.2-83r17: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 06/15/2023
Date Tested: 06/15/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1B
|
Rocap Number
|
no data
|
Heat Number(s)
|
120203597961
|
Mfg. Lot Number
|
no data
|
Finish Coating
|
Plain
|
Product Markings
|
BLUE
|
Size
|
0.875 in
|
Bolt Length
|
19 in
|
Pitch Diameter
|
.791 in
|
Pitch Diameter 2nd
|
.791 in
|