Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993715 DEA: 010G1404 EFIS: 0116000129
QA Service Level: 1
DIST-CO-RTE-PM: 01-HUM-96,169-VAR
Work Description: HUM 96-169 5 Bridges Rail Upgrade (Do not include in project name: STRUCTURAL STEEL, CONCRETE BARRIER, POLYESTER CONCRETE OVERLAY)
Location Description: HUMBOLDT COUNTY ON ROUTES 96 AND 169 AT VARIOUS LOCATIONS (Bridge Nos. 04-0215, 04-0059, 04-0063, 04-0225, 04-0061)
Contractor Name: Steelhead Constructors JV
Contractor Address: P.O. Box 536, Palo Cedro, CA 96073
Resident Engineer: Efren Banuelos Structure Rep.: Laura Cangas
DIME Sample ID: 2023-05-24-14
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Quality Assurance
Type of Material: SMTL TM6 - Steel Check Sample Plate
Sample Taken Date: 05/24/2023
Date that the sample was received by the laboratory/organization performing the testing: 05/24/2023
The quantity of what the sample constitutes: 1
A brief description of the sample: 10 X 12 Steel Plate
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: CK Johnson Industries
DIME Test ID: 2023-05-24-14-1
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 07/12/2023
Date Tested: 06/02/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
2
|
Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | S31294 | 0.354 | 0.09842 | 67002 | 76144 | 27.8 | aauvinen | | S31294 | 0.354 | 0.09842 | 67604 | 76402 | 25.7 | aauvinen |
| |
UTM
|
67kip
|
Temperature
|
72 F
|
DIME Test ID: 2023-05-24-14-2
Test Method: ASTM E415-21: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
Verified Date: 07/12/2023
Date Tested: 06/08/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Content, carbon
|
0.0882 %
|
Content, Si
|
0.252 %
|
Content, Mn
|
1.11 %
|
Content, P
|
0.0156 %
|
Content, S
|
0.0086 %
|
Content, Cr
|
0.0619 %
|
Content, Mo
|
0.0233 %
|
Content, Al
|
0.0369 %
|
Content, Co
|
0.0054 %
|
Content, Copper
|
0.0755 %
|
Content, Nb
|
0.0229 %
|
Content, Ti
|
0.0020 %
|
Content, V
|
0.0307 %
|
Content, Lead
|
0.0166 %
|
Content, Boron
|
0.0012 %
|
Content, Fe
|
98.1 %
|
Content, Ni
|
0.0355 %
|