Print Report | Back to Sample Detail

Sample Record for 2023-05-09-93

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994142 DEA: 044J9504 EFIS: 0416000026 QA Service Level: 1
DIST-CO-RTE-PM: 04-CC-4-R30.8/R40.4
Work Description: ROADWAY EXCAVATION, TEMPORARY BARRIER, AND HMA PAVING AT MVPS.
Location Description: CONTRA COSTA COUNTY ON ROUTE 4 AT VARIOUS LOCATIONS FROM 0.4 MILE EAST OF ROUTE 160/4 SEPARATION TO HOFFMAN LANE
Contractor Name: BAY CITIES PAVING & GRADING INC.
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-05-09-93
TL Number from the TL Form: C727226
Sample Submitted By Organization: CT D04 - Concord Field Laboratory
Sample Organization Contact: (510) 714-7019
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/09/2023
Date that the sample was received by the laboratory/organization performing the testing: 05/09/2023
The quantity of what the sample constitutes: 4 boxes
A brief description of the sample: 1/2 HMA Type A
From where was the sample collected: Manufacturer
Laboratory sample identification: Con_23_411
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: County Asphalt Martinez

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number: 1
Sublot number: 2
HMA Mix Number: L210223WMA
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2023-05-09-93-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 05/18/2023
Date Tested: 05/09/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test: JMF
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of Samples 2
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 1 7371.8 grams
Mass of oven-dry sample in air for Sample 1 1518.8 grams
Mass of container filled with the sample and water for Sample 1 8304.7 grams
Mass of container filled with water 2 7371.8 grams
Mass of oven-dry sample in air for Sample 2 1622.2 grams
Mass of container filled with the sample and water for Sample 2 8368.4 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.592
Specific Gravity for Sample 2 2.593
Average Specific Gravity 2.593
Theoretical maximum density at 25°C (77°F) 2585.5 kg/m^3