Print Report | Back to Sample Detail

Sample Record for 2023-04-30-6

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215109 DEA: 081C8504 EFIS: 0813000047 QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-74-0.0/5.8
Work Description: ROADWAY EXCAVATION, HOT MIX ASPHALT, AND STRUCTURAL SHOTCRETE WALLS.
Location Description: RIVERSIDE COUNTY NEAR LAKE ELSINORE FROM ORANGE COUNTY LINE TO MONTE VISTA STREET
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 38000 MONROE STREET, INDIO, CA 92203
Resident Engineer: Osama Abdalla Structure Rep.: Ryan Kash (Reports)

Sample Information

DIME Sample ID: 2023-04-30-6
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 04/30/2023
Date that the sample was received by the laboratory/organization performing the testing: 05/08/2023
The quantity of what the sample constitutes: 4 Bags of Agg., 2 Bags of RAP
A brief description of the sample: PSUE 3/4" HMA-A-SP
From where was the sample collected: Manufacturer
Laboratory sample identification: 0240A-23
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: California Commercial Asphalt - Lake Elsinore

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-33-0098
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Manufacturer
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: 53417615
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2023-04-30-6-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)05/12/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-04-30-6-2AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)05/12/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-04-30-6-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)05/12/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-04-30-6-4AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)05/12/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-04-30-6-5AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)05/12/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-04-30-6-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)05/12/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-04-30-6-7AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)05/12/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-04-30-6-8ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)05/12/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-04-30-6-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates05/12/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory
2023-04-30-6-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates05/12/2023Not scheduledRonica BhuyianCT D08 - Fontana Southern Regional Laboratory