Print Report | Back to Sample Detail

Sample Record for 2023-05-08-23

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994142 DEA: 044J9504 EFIS: 0416000026 QA Service Level: 1
DIST-CO-RTE-PM: 04-CC-4-R30.8/R40.4
Work Description: ROADWAY EXCAVATION, TEMPORARY BARRIER, AND HMA PAVING AT MVPS.
Location Description: CONTRA COSTA COUNTY ON ROUTE 4 AT VARIOUS LOCATIONS FROM 0.4 MILE EAST OF ROUTE 160/4 SEPARATION TO HOFFMAN LANE
Contractor Name: BAY CITIES PAVING & GRADING INC.
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-05-08-23
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Concord Field Laboratory
Sample Organization Contact: (510) 714-7019
Type of Sample: Quality Assurance
Type of Material: Aggregate
Sample Taken Date: 05/08/2023
Date that the sample was received by the laboratory/organization performing the testing: 05/08/2023
The quantity of what the sample constitutes: 4 bags
A brief description of the sample: 1/2 HMA Type A
From where was the sample collected: Manufacturer
Laboratory sample identification: Con_23_383
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: County Asphalt Martinez

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-07-0003
The fabricator's/manufacturer's product name for the sample: 1/2 HMA Type A
The fabricator/manufacturer designation for the sample: Batch
The plant number:
A detailed description of where the material sample was collected: bins 3 2 1
Where the material sample would have been placed if not sampled: Roadway
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number: L210223WMA

Test Results

Test 1 of 2

DIME Test ID: 2023-05-08-23-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 05/10/2023
Date Tested: 05/08/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
What type of gradation is being tested? Combined Gradation
Cumulative percent passing the 2 in. sieve 100 %
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 98 %
Cumulative percent passing the 3/8 in. sieve 90 %
Cumulative percent passing the #4 sieve 60 %
Cumulative percent passing the #8 sieve 34 %
Cumulative percent passing the #16 sieve 21 %
Cumulative percent passing the #30 sieve 13 %
Cumulative percent passing the #50 sieve 8 %
Cumulative percent passing the #100 sieve 5 %
Cumulative percent passing the #200 sieve 2.6 %

Test 2 of 2

DIME Test ID: 2023-05-08-23-2
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 05/10/2023
Date Tested: 05/08/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sand Equivalent 75