Project Information

Project ID: 214135 DEA: 09213404 EFIS: 0900000030 QA Service Level: 1

DIST-CO-RTE-PM: 09-INY-395-29.9/41.8

Work Description: ROADWAY EXCAVATION, PLACE HMA (TYPE A), AND ALTERNATIVE PIPE CULVERT.

Location Description: INYO COUNTY NEAR OLANCHA AND CARTAGO FROM 1.4 MILES SOUTH OF LOS ANGELES AQUEDUCT BRIDGE TO 0.2 MILE SOUTH OF ASH CREEK BRIDGE

Contractor Name: FISHER SAND & GRAVEL CO.

Contractor Address: 1302 W DRIVERS WAY, TEPE, AZ. 85284

Resident Engineer: Kris Raber Structure Rep.: Alex Naime-Falcon

Sample Information

DIME Sample ID: 2023-05-08-14

TL Number from the TL Form:

Sample Submitted By Organization: CT D09 - Bishop Field Laboratory

Sample Organization Contact: (760) 872-5211

Type of Sample: Quality Assurance

Type of Material: Concrete

Sample Taken Date: 05/08/2023

Date that the sample was received by the laboratory/organization performing the testing: 05/08/2023

The quantity of what the sample constitutes: 1 bag

A brief description of the sample: 1" x #4 Coarse Concrete Agg

From where was the sample collected: Supplier

Laboratory sample identification: PCC-20

Structure unique identifier:

Structure name:

The fabricator/manufacturer/facility name: 711 Materials Ridgecrest

Material Information

The concrete mix design number: Mix 718216A

The truck number from where the sample was collected:

The batch plant ticket number from where the sample was collected: Concrete Plant

Concrete batch plant: 718216A

The fabricator/manufacturer designation for the sample: 711

A detailed description of where the material sample was collected: At Belt Cut

Where the material sample would have been placed if not sampled:

From Lot No.:

Bag Lot No.:

Test Results

Test 1 of 1

DIME Test ID: 2023-05-08-14-2

Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

Capped in accordance with ASTM C617 - Sulfur Mortar Cap

Verified Date: 06/05/2023

Date Tested: 06/05/2023

Submitted By Organization: CT D09 - Bishop Field Laboratory

Organization Address: 500 South Main Street,

Organization City: Bishop

Organization State: CA

Organization Zipcode: 93514

Organization Email: chris.talbot@dot.ca.gov

Organization Phone: (760) 872-0794

General Comments for this Test: 3 Broken at 28 Days

Test Result Compliance: complies

Additional Comments When Verified:

Unit system used?	US Units
Number of specimens	3
Test performed	With no density determined
Cross sectional area of cylinder 1	12.57 in^2
Cross sectional area of cylinder 2	12.57 in^2
Cross sectional area of cylinder 3	12.57 in^2
Capped in accordance with?	ASTM C617 - Sulfur Mortar Cap
Compressive strength (to nearest 10 psi)	4790 psi
Average diameter of cylinder 1	4.00 in
Average diameter of cylinder 2	4.00 in
Compressive strength of cylinder 1	4725.5 psi
Compressive strength of cylinder 2	4790.4 psi
Average diameter of cylinder 3	4.00 in
Compressive strength of cylinder 3	4859.2 psi
Maximum load on cylinder 1	59400 lb
Maximum load on cylinder 2	60215 lb
Maximum load on cylinder 3	61080 lb
Type of fracture pattern of cylinder 1	1
Type of fracture pattern of cylinder 2	1
Type of fracture pattern of cylinder 3	1
Comment on any defect in either specimen or caps (Max 250 Characters)	no data
Correction factor for cylinder 1	1
Correction factor for cylinder 2	1
Correction factor for cylinder 3	1
Age of specimen	28 days

Tests Assigned to this Sample