Print Report | Back to Sample Detail

Sample Record for 2023-05-05-12

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994777 DEA: 041J7804 EFIS: 0414000357 QA Service Level: 1
DIST-CO-RTE-PM: 04-ALA-24,80,680,880-VAR
Work Description:
Location Description: FOR CONSTRUCTION ON STATE HIGHWAY IN ALAMEDA AND CONTRA COSTA COUNTIES AT VARIOUS LOCATIONS
Contractor Name: O.C. JONES & SONS INC.
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-05-05-12
TL Number from the TL Form: C422-316
Sample Submitted By Organization: CT D04 - Concord Field Laboratory
Sample Organization Contact: (510) 714-7019
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/05/2023
Date that the sample was received by the laboratory/organization performing the testing: 05/05/2023
The quantity of what the sample constitutes: 2 boxes
A brief description of the sample: 1/2 RHMA-O
From where was the sample collected: Manufacturer
Laboratory sample identification: Con_23_373
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Desilva Gates

Material Information

HMA Type: OGFC
HMA Grading: 1/2 inch
Lot number: 1
Sublot number: 2
HMA Mix Number: MD 6653
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2023-05-05-12-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 05/09/2023
Date Tested: 05/05/2023
Submitted By Organization: CT D04 - Concord Field Laboratory
Organization Address: 2525 Stanwell Drive, Suite 100,
Organization City: Concord
Organization State: CA
Organization Zipcode: 94520
Organization Email: gurind.joshi@dot.ca.gov
Organization Phone: (510) 714-7019
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of Samples 1
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 1 7371.8 grams
Mass of oven-dry sample in air for Sample 1 1608.2 grams
Mass of container filled with the sample and water for Sample 1 8311.7 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.406
Theoretical maximum density at 25°C (77°F) 2399 kg/m^3