Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993511 DEA: 120R2004 EFIS: 1218000065
QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA-5-0.0/2.0
Work Description: PLACE PRECAST CONCRETE PAVEMENT AND REPLACE CONCRETE SLAB.
Location Description: ORANGE COUNTY IN SAN CLEMENTE FROM ORANGE COUNTY LINE TO 0.4 MILE NORTH OF EL CAMINO REAL UNDERCROSSING
Contractor Name: Myers & Sons (SBE)
Contractor Address: 2554 Millcreek Drive, Sacramento, CA 95833
Resident Engineer: Mona Shahidi Structure Rep.: Unknown
DIME Sample ID: 2023-04-24-76
TL Number from the TL Form:
Sample Submitted By Organization: CT D12 - Huntington Beach Field Laboratory
Sample Organization Contact: 9492798846
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 04/24/2023
Date that the sample was received by the laboratory/organization performing the testing: 04/24/2023
The quantity of what the sample constitutes: 3 boxes of HMA, 1 bag of Agg, 1 bag of RAP
A brief description of the sample: 3/4 RHMAG
From where was the sample collected: Manufacturer
Laboratory sample identification: 23-0341
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: RJ Noble Orange
DIME Test ID: 2023-04-24-76-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 05/08/2023
Date Tested: 04/25/2023
Submitted By Organization: CT D12 - Huntington Beach Field Laboratory
Organization Address: 19601 Beach Boulevard,
Organization City: Huntington Beach
Organization State: CA
Organization Zipcode: 92648
Organization Email: frank.mai@dot.ca.gov
Organization Phone: (949) 279-8846
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What temperature unit is used?
|
Celsius
|
Test procedure used?
|
Method A
|
Mass of the specimen basket assembly
|
3951.5 g
|
Mass of the specimen and specimen basket assembly prior to ignition
|
6045.8 g
|
Mass of HMA Sample prior to ignition
|
2094.3 g
|
Corrected Asphalt Binder Content
|
7.71 %
|
Mass Loss
|
157.9 g
|
Mass of aggregate remaining after ignition
|
1936.4 g
|
Correction Factor (Percent by mass of HMA Specimen)
|
-0.17 %
|
Moisture Content
|
0.00 %
|
Temperature Compensation Factor
|
0.00 %
|
Test Temperature
|
538 C
|
DIME Test ID: 2023-04-24-76-2
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 05/08/2023
Date Tested: 04/25/2023
Submitted By Organization: CT D12 - Huntington Beach Field Laboratory
Organization Address: 19601 Beach Boulevard,
Organization City: Huntington Beach
Organization State: CA
Organization Zipcode: 92648
Organization Email: frank.mai@dot.ca.gov
Organization Phone: (949) 279-8846
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
What is the unit of measurement for theoretical density?
|
US Units
|
Mass Determination
|
Air
|
Method Performed
|
Mechanical Agitation - Method A
|
Mass of container filled with water 1
|
7309.2 grams
|
Mass of oven-dry sample in air for Sample 1
|
2549.4 grams
|
Mass of container filled with the sample and water for Sample 1
|
8809.7 grams
|
Temperature of Water
|
77 °F
|
Specific Gravity for Sample 1
|
2.431
|
Theoretical maximum density at 25°C (77°F)
|
151.3 lb/ft^3
|
DIME Test ID: 2023-04-24-76-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 05/08/2023
Date Tested: 04/28/2023
Submitted By Organization: CT D12 - Huntington Beach Field Laboratory
Organization Address: 19601 Beach Boulevard,
Organization City: Huntington Beach
Organization State: CA
Organization Zipcode: 92648
Organization Email: frank.mai@dot.ca.gov
Organization Phone: (949) 279-8846
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity
|
2.295
|
Bulk Specific Gravity 2
|
2.291
|
Bulk Specific Gravity 3
|
2.303
|
Average Bulk Specific Gravity
|
2.296
|