Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 214640 DEA: 042J7204 EFIS: 0415000016
QA Service Level: 1
DIST-CO-RTE-PM: 04-CC-580-1.17
Work Description: STEGE DRAIN SUPER-STRUCTURE, PRECAST VOIDED SLABS
Location Description: CONTRA COSTA COUNTY IN RICHMOND FROM 0.3 MILE EAST OF STEGE DRAIN BRIDGE TO 0.3 MILE WEST OF BAYVIEW AVENUE OVERCROSSING
Contractor Name: GORDON N BALL INC
Contractor Address: 333 CAMILLE AVENUE, ALAMO CA 94507
Resident Engineer: Luis Melendez Structure Rep.: Laraine Woo
DIME Sample ID: 2023-04-26-59
TL Number from the TL Form: C727215
Sample Submitted By Organization: CT D04 - Richmond Field Laboratory
Sample Organization Contact: (510) 231-7151
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 04/26/2023
Date that the sample was received by the laboratory/organization performing the testing: 04/28/2023
The quantity of what the sample constitutes: 4 boxes
A brief description of the sample: 1/2 HMA Type A
From where was the sample collected: Manufacturer
Laboratory sample identification: Rich_23_132
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Dutra Materials Richmond
DIME Test ID: 2023-04-26-59-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 07/27/2023
Date Tested: 04/27/2023
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Boulevard,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94508
Organization Email: santiago.sequeira@dot.ca.gov
Organization Phone: (510) 385-7641
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of Samples
|
2
|
What is the unit of measurement for theoretical density?
|
SI Units
|
Mass Determination
|
Air
|
Method Performed
|
Mechanical Agitation - Method A
|
Mass of container filled with water 1
|
7371.8 grams
|
Mass of oven-dry sample in air for Sample 1
|
1625.6 grams
|
Mass of container filled with the sample and water for Sample 1
|
8336.6 grams
|
Mass of container filled with water 2
|
7371.8 grams
|
Mass of oven-dry sample in air for Sample 2
|
1628.7 grams
|
Mass of container filled with the sample and water for Sample 2
|
8338.5 grams
|
Temperature of Water
|
77 °F
|
Specific Gravity for Sample 1
|
2.460
|
Specific Gravity for Sample 2
|
2.460
|
Average Specific Gravity
|
2.460
|
Theoretical maximum density at 25°C (77°F)
|
2452.9 kg/m^3
|
DIME Test ID: 2023-04-26-59-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 07/27/2023
Date Tested: 05/01/2023
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Boulevard,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94508
Organization Email: santiago.sequeira@dot.ca.gov
Organization Phone: (510) 385-7641
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity
|
2.339
|
Bulk Specific Gravity 2
|
2.358
|
Average Bulk Specific Gravity
|
2.349
|