Print Report | Back to Sample Detail

Sample Record for 2023-02-23-23

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993173 DEA: 042J88U4 EFIS: 0418000401 QA Service Level: 1
DIST-CO-RTE-PM: 04-NAP-29-38.9/42.9
Work Description:
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-02-23-23
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Per Request
Type of Material: SMTL TM6 - Steel Check Sample Plate
Sample Taken Date: 02/23/2023
Date that the sample was received by the laboratory/organization performing the testing: 04/10/2023
The quantity of what the sample constitutes: 1
A brief description of the sample: 0.63" square rebar
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: na

Material Information

Heat Number(s): NA
Material Specification: N/A
Grade: NA
Thickness: 0.6310"
Shape: Slice of Cored Rebar
Metal Foundry Manufacturer (Mill): NA
Plate Dimension: 1.8180"
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2023-02-23-23-1
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/27/2023
Date Tested: 04/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number no data
Finish Coating Plain
Product Markings 0
Size 0
Bolt Length 0
Hardness Reading Scale B Scale
Hardness Reading Average 69.88
Spacing Ok

Test 2 of 2

DIME Test ID: 2023-02-23-23-3
Test Method: ASTM E415-21: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
Verified Date: 04/27/2023
Date Tested: 04/27/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Content, carbon 0.278 %
Content, Si 0.137 %
Content, Mn 0.529 %
Content, P 0.0269 %
Content, S 0.0369 %
Content, Cr 0.0195 %
Content, Mo 0.0025 %
Content, Al 0.0458 %
Content, Co 0.0164 %
Content, Copper 0.158 %
Content, Nb 0.0029 %
Content, Ti 0.0009 %
Content, V 0.0027 %
Content, Lead 0.0181 %
Content, Boron 0.0005 %
Content, Fe 98.6 %
Content, Ni 0.0401 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2023-02-23-23-2ASTM E415-21: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry04/27/2023Not scheduledShe VangCT HQ - Sacramento Structural Materials Testing Laboratory