Print Report | Back to Sample Detail

Sample Record for 2023-04-25-14

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993715 DEA: 010G1404 EFIS: 0116000129 QA Service Level: 1
DIST-CO-RTE-PM: 01-HUM-96,169-VAR
Work Description: HUM 96-169 5 Bridges Rail Upgrade (Do not include in project name: STRUCTURAL STEEL, CONCRETE BARRIER, POLYESTER CONCRETE OVERLAY)
Location Description: HUMBOLDT COUNTY ON ROUTES 96 AND 169 AT VARIOUS LOCATIONS (Bridge Nos. 04-0215, 04-0059, 04-0063, 04-0225, 04-0061)
Contractor Name: Steelhead Constructors JV
Contractor Address: P.O. Box 536, Palo Cedro, CA 96073
Resident Engineer: Efren Banuelos Structure Rep.: Laura Cangas

Sample Information

DIME Sample ID: 2023-04-25-14
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM6 - Steel Check Sample Plate
Sample Taken Date: 04/25/2023
Date that the sample was received by the laboratory/organization performing the testing: 04/28/2023
The quantity of what the sample constitutes: 3/4" x96" x 480"
A brief description of the sample: 3/4" A709 gr 50
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name: Humbolt 5 bridges
The fabricator/manufacturer/facility name: C&K Johnson Ind

Material Information

Heat Number(s): E2L265
Material Specification: A36
Grade: 36
Thickness: .75
Shape: plate
Metal Foundry Manufacturer (Mill): SSAB Alabama
Plate Dimension: 96 x 480
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2023-04-25-14-1
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 05/19/2023
Date Tested: 05/11/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 2
SampleHeat NumberDiameter (in)Area (sqin)Stress at Offset (psi)Tensile Strength (psi)Elongation in 4 x d (%)Tested By
E2L2650.4970.194492717126132.8aauvinen
E2L2650.5020.19792499647107933.4aauvinen
UTM 67kip
Temperature 72 F

Test 2 of 2

DIME Test ID: 2023-04-25-14-2
Test Method: ASTM E415-21: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
Verified Date: 05/19/2023
Date Tested: 05/16/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Content, carbon 0.183 %
Content, Si 0.0349 %
Content, Mn 0.828 %
Content, P 0.0110 %
Content, S 0.0065 %
Content, Cr 0.135 %
Content, Mo 0.0271 %
Content, Al 0.0401 %
Content, Co 0.0083 %
Content, Copper 0.272 %
Content, Nb 0.0035 %
Content, Ti 0.0123 %
Content, V 0.0033 %
Content, Lead 0.0173 %
Content, Boron 0.00078 %
Content, Fe 98.2 %
Content, Ni 0.136 %