Print Report | Back to Sample Detail

Sample Record for 2023-04-11-53

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994513 DEA: 043Y0604 EFIS: 0423000193 QA Service Level: 1
DIST-CO-RTE-PM: 04-MRN-1-var/var
Work Description: PAVEMENT REPAIR
Location Description:
Contractor Name: Team Ghilotti
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-04-11-53
TL Number from the TL Form: C727119
Sample Submitted By Organization: CT D04 - Richmond Field Laboratory
Sample Organization Contact: (510) 231-7151
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 04/11/2023
Date that the sample was received by the laboratory/organization performing the testing: 04/14/2023
The quantity of what the sample constitutes: 2 Boxes
A brief description of the sample: 3/4 HMA Type A
From where was the sample collected: Manufacturer
Laboratory sample identification: Rich_23_101
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: BoDean Santa Rosa

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 9
HMA Mix Number: 700SPW16
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2023-04-11-53-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 04/24/2023
Date Tested: 04/14/2023
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Boulevard,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94508
Organization Email: santiago.sequeira@dot.ca.gov
Organization Phone: (510) 385-7641
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Celsius
Test procedure used? Method A
Mass of the specimen basket assembly 3343.4 g
Mass of the specimen and specimen basket assembly prior to ignition 5596.3 g
Mass of HMA Sample prior to ignition 2252.9 g
Corrected Asphalt Binder Content 5.02 %
Mass Loss 140.9 g
Mass of aggregate remaining after ignition 2112.0 g
Correction Factor (Percent by mass of HMA Specimen) 1.10 %
Moisture Content 0.00 %
Temperature Compensation Factor 0.13 %
Test Temperature 538 C