Print Report | Back to Sample Detail

Sample Record for 2023-04-03-26

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212112 DEA: 080C2514 EFIS: 0816000076 COOP: 081645 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-10-0.0/13.2
Work Description: Design-Build of I-10 Corridor Contract 1 - Adding 2 new Express Lanes
Location Description: LA/SBD County Line to PM 13.2 near I-15
Contractor Name: Lane-Security Paving Joint Venture
Contractor Address: 3450 Centre Lake Drive, 1st Floor, Ontario, CA 91761
Resident Engineer: Jose Corona Structure Rep.: Luis Negrete

Sample Information

DIME Sample ID: 2023-04-03-26
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 04/03/2023
Date that the sample was received by the laboratory/organization performing the testing: 04/07/2023
The quantity of what the sample constitutes: 2 Bags Of Agg., 1 Bag Rap
A brief description of the sample: PSUE 3/4" HMA-A-SP R15 0.75% LAS
From where was the sample collected: Manufacturer
Laboratory sample identification: 0195A-23
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Materials-Irwindale

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-19-0035
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Belt Cut at Vulcan Materials-Irwindale
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: 220831A IRW SJR LS
Lot number:
Sublot number:
Aggregate Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2023-04-03-26-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
Data has not been verified.

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2023-04-03-26-2AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)04/07/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-04-03-26-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)04/07/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-04-03-26-4AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)04/07/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-04-03-26-5AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)04/07/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-04-03-26-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)04/07/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-04-03-26-7AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)04/07/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-04-03-26-8ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)04/07/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-04-03-26-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates04/07/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-04-03-26-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates04/07/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory