Print Report | Back to Sample Detail

Sample Record for 2023-04-04-9

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 993184 DEA: 040A7724 EFIS: 0420000288 COOP: 042763 QA Service Level: 1
DIST-CO-RTE-PM: 04-ALA-80-6.4/6.8
Work Description: Excavation, HMA, structural concrete, minor concrete and drainage.
Location Description: IN BERKELEY AND ALBANY FROM 0.6 MILE NORTH OF UNIVERSITY AVENUE OVERCROSSING TO 0.3 MILE SOUTH OF EL CERRITO SEPARATION AND OVERHEAD
Contractor Name: OC Jones (Will Dieterich)
Contractor Address: 1520 Fourth Street, Berkeley, CA 94710
Resident Engineer: Maxime Dabilly Structure Rep.: Eric Urementa

Sample Information

DIME Sample ID: 2023-04-04-9
TL Number from the TL Form: C727176
Sample Submitted By Organization: CT D04 - Richmond Field Laboratory
Sample Organization Contact: (510) 231-7151
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 04/04/2023
Date that the sample was received by the laboratory/organization performing the testing: 04/04/2023
The quantity of what the sample constitutes: 2 boxes
A brief description of the sample: 3/4" HMA HOT MIX
From where was the sample collected: Manufacturer
Laboratory sample identification: Rich_23_ 79
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Dutra Materials Richmond

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 2
Sublot number: 1
HMA Mix Number: L210140WMA
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2023-04-04-9-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/05/2023
Date Tested: 04/05/2023
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Boulevard,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94508
Organization Email: santiago.sequeira@dot.ca.gov
Organization Phone: (510) 385-7641
General Comments for this Test: Lot 2 SL 1
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of Samples 2
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 1 7391.8 grams
Mass of oven-dry sample in air for Sample 1 2591.0 grams
Mass of container filled with the sample and water for Sample 1 8916.4 grams
Mass of container filled with water 2 7391.8 grams
Mass of oven-dry sample in air for Sample 2 2606.0 grams
Mass of container filled with the sample and water for Sample 2 7391.8 grams
Temperature of Water 8926 °F
Specific Gravity for Sample 1 2.430
Specific Gravity for Sample 2 1.000
Average Specific Gravity 1.715
Theoretical maximum density at 25°C (77°F) 1710 kg/m^3