Print Report | Back to Sample Detail

Sample Record for 2023-03-21-5

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 8801 DEA: AML-CEM EFIS: AML-CEM QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for Cementitious Materials for use in Concrete Authorized Material List (AML)
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-03-21-5
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Sample Organization Contact: (916) 227-7071
Type of Sample: Proficiency
Type of Material: Cementitious
Sample Taken Date: 03/21/2023
Date that the sample was received by the laboratory/organization performing the testing: 03/18/2022
The quantity of what the sample constitutes: 1 Bucket
A brief description of the sample: Pozzolan
From where was the sample collected: Source
Laboratory sample identification: CM238073
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: CCRL POZZ 73

Material Information

Brand: CCRL
Mill: CCRL Pozzolan
Type of Cementitious Material: Class F or N Flyash
Test results on following page(s): 7

Test Results

Test 1 of 7

DIME Test ID: 2023-03-21-5-3
Test Method: CTM 527-February 2014: Method of Test for Expansion in Water and Contraction in Air of Portland Cement Mortar
Verified Date: 05/12/2023
Date Tested: 05/11/2023
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Average change in length in water 0.0000 %
Average change in length in air 0.1063 %

Test 2 of 7

DIME Test ID: 2023-03-21-5-4
Test Method: ASTM C430-8: Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
Verified Date: 05/12/2023
Date Tested: 05/11/2023
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Correction Factor (CF) .24
Corrected Residue (Rc) 0.9

Test 3 of 7

DIME Test ID: 2023-03-21-5-5
Test Method: ASTM C151-15: Standard Test Method for Autoclave Expansion of Hydraulic Cement
Verified Date: 05/12/2023
Date Tested: 05/10/2023
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Initial length of specimen 0.3184
Final length of specimen 0.3166
Change in length of specimen(In percent) -0.02 %
Gauge Length 10

Test 4 of 7

DIME Test ID: 2023-03-21-5-7
Test Method: ASTM C188-15: Standard Test Method for Density of Hydraulic Cement
Verified Date: 05/12/2023
Date Tested: 05/09/2023
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Density of hydraulic cement 2.355 g/cm^3

Test 5 of 7

DIME Test ID: 2023-03-21-5-8
Test Method: ASTM C109-21: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
Verified Date: 05/12/2023
Date Tested: 05/10/2023
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Will control cubes be used per ASTM C311? yes
Age of specimen 28 days
The amount of flow 112 %
The amount of water used 49.6 %
Compressive strength of 1st specimen 4467 psi
Compressive strength of 2nd specimen 4364 psi
Compressive strength of 3rd specimen 4637 psi
Average Compressive strength (to nearest 10 psi) 4490 psi
Average Compressive strength (to nearest 10 psi) control group 4850 psi
Strength Activity Index of Portland Cement per ASTM C109 93 %

Test 6 of 7

DIME Test ID: 2023-03-21-5-9
Test Method: ASTM C109-21: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
Verified Date: 05/12/2023
Date Tested: 05/10/2023
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test: 28 day
Test Result Compliance:
Additional Comments When Verified:
Will control cubes be used per ASTM C311? yes
Age of specimen 28 days
The amount of flow 112 %
The amount of water used 49.6 %
Compressive strength of 1st specimen 6520 psi
Compressive strength of 2nd specimen 6500 psi
Compressive strength of 3rd specimen 6456 psi
Average Compressive strength (to nearest 10 psi) 6490 psi
Average Compressive strength (to nearest 10 psi) control group 6040 psi
Strength Activity Index of Portland Cement per ASTM C109 107 %

Test 7 of 7

DIME Test ID: 2023-03-21-5-10
Test Method: ASTM C187-16: Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste (Water Normal Consistency)
Verified Date: 05/12/2023
Date Tested: 04/17/2023
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Mass of Water 180 g
Mass of Dry Cement 650 g
Water required for normal consistency 28.00 %