Print Report | Back to Sample Detail

Sample Record for 2023-03-03-46

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994512 DEA: 043Y2804 EFIS: 0423000216 QA Service Level: 1
DIST-CO-RTE-PM: 04-MRN-101-var/var
Work Description: REPAIR STORM-RELATED PAVEMENT DAMAGE & SETTLEMENT
Location Description:
Contractor Name: OC Jones
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-03-03-46
TL Number from the TL Form: C727113
Sample Submitted By Organization: CT D04 - Richmond Field Laboratory
Sample Organization Contact: (510) 231-7151
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 03/03/2023
Date that the sample was received by the laboratory/organization performing the testing: 03/24/2023
The quantity of what the sample constitutes: 2 boxs
A brief description of the sample: HMA Hot mix
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Bodean - Santa Rosa

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: 1
Sublot number: 9
HMA Mix Number: 700SPW16
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2023-03-03-46-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/03/2023
Date Tested: 03/31/2023
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Boulevard,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94508
Organization Email: santiago.sequeira@dot.ca.gov
Organization Phone: (510) 385-7641
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of Samples 2
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 1 7371.8 grams
Mass of oven-dry sample in air for Sample 1 2646.6 grams
Mass of container filled with the sample and water for Sample 1 9000.4 grams
Mass of container filled with water 2 7371.8 grams
Mass of oven-dry sample in air for Sample 2 2615.1 grams
Mass of container filled with the sample and water for Sample 2 8979.0 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.600
Specific Gravity for Sample 2 2.595
Average Specific Gravity 2.598
Theoretical maximum density at 25°C (77°F) 2590.5 kg/m^3