Print Report | Back to Sample Detail

Sample Record for 2015-07-27-10

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 210032 DEA: 044A0904 EFIS: 0415000178 QA Service Level: 1
DIST-CO-RTE-PM: 04-NAP-29,101-47.0/47.2
Work Description: BRIDGE REPLACEMENT.
Location Description: NAPA COUNTY ABOUT 6. MILES NORTH OF CALISTOGA AT TROUTDALE CREEK BRIDGE.
Contractor Name: GORDON N BALL INC
Contractor Address: 333 CAMILLE AVENUE, ALAMO CA 94507
Resident Engineer: Syd Valeh Structure Rep.: Jonathan Chi

Sample Information

DIME Sample ID: 2015-07-27-10
TL Number from the TL Form: Unknown
Sample Submitted By Organization: RMA Group - Rancho Cordova
Sample Organization Contact: 916-631-7194
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 07/27/2015
Date that the sample was received by the laboratory/organization performing the testing: 07/28/2015
The quantity of what the sample constitutes: 100 cy
A brief description of the sample: PCC
From where was the sample collected: Job Site
Laboratory sample identification: Unknown
Structure unique identifier: Unknown
Structure name: Troutdale Creek Bridge
The fabricator/manufacturer/facility name: Harold Smith and Sons

Material Information

The concrete mix design number: CT2-25PC
The truck number from where the sample was collected: Truck No 124
The batch plant ticket number from where the sample was collected: 120854
Concrete batch plant: Unknown
The fabricator/manufacturer designation for the sample: Unknown
A detailed description of where the material sample was collected: Load 3
Where the material sample would have been placed if not sampled: Abutment 2 and Retaining Wall 3
From Lot No.:
Bag Lot No.:

Test Results

Test 1 of 5

DIME Test ID: 2015-07-27-10-1
Test Method: ASTM C143-15a: Standard Test Method for Slump of Hydraulic-Cement Concrete
Verified Date: 09/25/2015
Date Tested: 07/27/2015
Submitted By Organization: RMA Group - Rancho Cordova
Organization Address: 3150 Fitzgerald Road,
Organization City: Rancho Cordova
Organization State: CA
Organization Zipcode: 95742
Organization Email: mlowrance@rmacompanies.com
Organization Phone: 916-631-7194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Slump 5.25 inch

Test 2 of 5

DIME Test ID: 2015-07-27-10-2
Test Method: ASTM C1064-12: Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
Verified Date: 09/25/2015
Date Tested: 07/27/2015
Submitted By Organization: RMA Group - Rancho Cordova
Organization Address: 3150 Fitzgerald Road,
Organization City: Rancho Cordova
Organization State: CA
Organization Zipcode: 95742
Organization Email: mlowrance@rmacompanies.com
Organization Phone: 916-631-7194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Temperature 79 F

Test 3 of 5

DIME Test ID: 2015-07-27-10-3
Test Method: ASTM C231-17a: Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
Verified Date: 09/25/2015
Date Tested: 07/27/2015
Submitted By Organization: RMA Group - Rancho Cordova
Organization Address: 3150 Fitzgerald Road,
Organization City: Rancho Cordova
Organization State: CA
Organization Zipcode: 95742
Organization Email: mlowrance@rmacompanies.com
Organization Phone: 916-631-7194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Air content 1.9 %

Test 4 of 5

DIME Test ID: 2015-07-27-10-4
Test Method: ASTM C138-17a: Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
Verified Date: 09/25/2015
Date Tested: 07/27/2015
Submitted By Organization: RMA Group - Rancho Cordova
Organization Address: 3150 Fitzgerald Road,
Organization City: Rancho Cordova
Organization State: CA
Organization Zipcode: 95742
Organization Email: mlowrance@rmacompanies.com
Organization Phone: 916-631-7194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Identification of concrete represented by the sample Set 1
Volume of the measure 0.249 ft^3
Density of concrete 150.28 lb/ft^3
Yield of concrete no data
Relative yield of the batch no data
Cement content no data
Air content no data

Test 5 of 5

DIME Test ID: 2015-07-27-10-5
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Verified Date: 09/25/2015
Date Tested: 08/24/2015
Submitted By Organization: RMA Group - Rancho Cordova
Organization Address: 3150 Fitzgerald Road,
Organization City: Rancho Cordova
Organization State: CA
Organization Zipcode: 95742
Organization Email: mlowrance@rmacompanies.com
Organization Phone: 916-631-7194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Number of specimens 2
Test performed With no density determined
Capped in accordance with? ASTM C617/CTM521
Average diameter of cylinder 1 6.01 in
Average diameter of cylinder 2 6.01 in
Cross sectional area of cylinder 1 28.37 in^2
Cross sectional area of cylinder 2 28.37 in^2
Compressive strength (to nearest 10 psi) 5460 psi
Maximum load on cylinder 1 154510 lb
Maximum load on cylinder 2 155150 lb
Type of fracture pattern of cylinder 1 2
Type of fracture pattern of cylinder 2 2
Comment on any defect in either specimen or caps (Max 250 Characters) no data
Correction factor for cylinder 1 1
Correction factor for cylinder 2 no data
Age of specimen 28 days
Age of specimen in hours no data

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.