Print Report | Back to Sample Detail

Sample Record for 2023-03-18-21

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212112 DEA: 080C2514 EFIS: 0816000076 COOP: 081645 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-10-0.0/13.2
Work Description: Design-Build of I-10 Corridor Contract 1 - Adding 2 new Express Lanes
Location Description: LA/SBD County Line to PM 13.2 near I-15
Contractor Name: Lane-Security Paving Joint Venture
Contractor Address: 3450 Centre Lake Drive, 1st Floor, Ontario, CA 91761
Resident Engineer: Jose Corona Structure Rep.: Luis Negrete

Sample Information

DIME Sample ID: 2023-03-18-21
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Sample Organization Contact: (760) 252-9216
Type of Sample: Quality Assurance
Type of Material: Concrete
Sample Taken Date: 03/18/2023
Date that the sample was received by the laboratory/organization performing the testing: 03/19/2023
The quantity of what the sample constitutes: 3
A brief description of the sample: cast concrete beams
From where was the sample collected: Job Site
Laboratory sample identification: set7 A B C
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: LANEsecurity paving

Material Information

The concrete mix design number: G3-21-PRS-238R
The truck number from where the sample was collected: time 1615 hrs
The batch plant ticket number from where the sample was collected: time 1615 hrs
Concrete batch plant:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: At the plant
Where the material sample would have been placed if not sampled:
From Lot No.:
Bag Lot No.:

Test Results

Test 1 of 3

DIME Test ID: 2023-03-18-21-1
Test Method: ASTM C293-10: Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
Verified Date: 03/29/2023
Date Tested: 03/28/2023
Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: kaushalkumar.talati@dot.ca.gov
Organization Phone: (951) 840-8328
General Comments for this Test: AVE OF 793 PSI FOR 650PSI @10 DAYS BREAK
Test Result Compliance: complies
Additional Comments When Verified:
Unit system used? US Units
Modulus of rupture 770 psi

Test 2 of 3

DIME Test ID: 2023-03-18-21-2
Test Method: ASTM C293-10: Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
Verified Date: 03/29/2023
Date Tested: 03/28/2023
Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: kaushalkumar.talati@dot.ca.gov
Organization Phone: (951) 840-8328
General Comments for this Test: AVE OF 793 PSI FOR 650PSI @10 DAYS BREAK
Test Result Compliance: complies
Additional Comments When Verified:
Unit system used? US Units
Modulus of rupture 850 psi

Test 3 of 3

DIME Test ID: 2023-03-18-21-3
Test Method: ASTM C293-10: Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
Verified Date: 03/29/2023
Date Tested: 03/28/2023
Submitted By Organization: CT D08 - Barstow Field Laboratory 1
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: kaushalkumar.talati@dot.ca.gov
Organization Phone: (951) 840-8328
General Comments for this Test: AVE OF 793 PSI FOR 650PSI @10 DAYS BREAK
Test Result Compliance: complies
Additional Comments When Verified:
Unit system used? US Units
Modulus of rupture 755 psi