Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993491 DEA: 07336504 EFIS: 0716000401
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-110-3.9/5.9
Work Description: PLACE STAMPED CONCRETE, CONSTRUCT MVPS AND ACCESS ROADS.
Location Description: LOS ANGELES COUNTY IN AND NEAR LOS ANGELES AND CARSON AT VARIOUS LOCATIONS FROM 0.2 MILE SOUTH OF ROUTE 110/1 SEPARATION TO 0.4 MILE NORTH OF SEPULVEDA BOULEVARD UNDERCROSSING.
Contractor Name: AUTOBAHN CONSTRUCTION
Contractor Address: 933 N Batavia St,, Orange, CA 92867
Resident Engineer: Thang Ton Structure Rep.: Unknown
DIME Sample ID: 2023-03-23-8
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Per Request
Type of Material: Asphalt Binder
Sample Taken Date: 03/23/2023
Date that the sample was received by the laboratory/organization performing the testing: 03/27/2023
The quantity of what the sample constitutes: 1 Quart Can
A brief description of the sample: PG Asphalt Binder
From where was the sample collected: Supplier
Laboratory sample identification: 0182-23
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan-Irwindale
Performance Grade: PG 64-16
Modified: No
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Certified Asphalt Supplier: Lunday Thagard Company-World Oil - South Gate CA
Multigrade: Yes
Multigrade Type: PG 64-16 / PG 64-10
Asphalt Binder Mix Number:
DIME Test ID: 2023-03-23-8-1
Test Method: AASHTO T228-09r13: Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials (Specific Gravity)
Verified Date: 04/30/2023
Date Tested: 03/28/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
DIME Test ID: 2023-03-23-8-2
Test Method: AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
Verified Date: 04/30/2023
Date Tested: 03/28/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test: - 0.068 + 0.006 = - 0.062
Test Result Compliance: complies
Additional Comments When Verified:
Is mass change based on one or two containers?
|
Two
|
Any material loss from containers during heating process/testing?
|
No
|
Mass of empty container #1
|
167.270 grams
|
Mass of empty container #2
|
169.567 grams
|
Mass of container #1 before test (m1i)
|
201.892 grams
|
Mass of container #2 before test (m2i)
|
204.566 grams
|
Mass of container #1 after test (m1f)
|
201.868 grams
|
Mass of container #2 after test (m2f)
|
204.543 grams
|
Average mass change
|
-0.068 percent
|
DIME Test ID: 2023-03-23-8-3
Test Method: AASHTO T315-12: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 04/30/2023
Date Tested: 03/28/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test: ORIGINAL
Test Result Compliance: complies
Additional Comments When Verified:
Phase
|
Original binder
|
Phase Angle (δ) (for the 10 cycles)
|
89.2 degree
|
Dynamic Shear, G*/sin(δ)
|
1.25 kPa
|
(G*) x sin(δ)=
|
no data
|
DIME Test ID: 2023-03-23-8-4
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 04/30/2023
Date Tested: 03/28/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test: RTFO
Test Result Compliance: complies
Additional Comments When Verified:
Phase
|
RTFO residue
|
Test Plate Diameter
|
25 mm
|
Phase Angle (δ) (for the 10 cycles)
|
88.1 degree
|
Dynamic Shear, G*/sin(δ)
|
2.51 kPa
|
DIME Test ID: 2023-03-23-8-5
Test Method: AASHTO T316-17: Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
Verified Date: 04/30/2023
Date Tested: 03/28/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Is viscosity reading in cP/Pa-s?
|
Pa-s
|
Time of test
|
8:10 HH:MM
|
Test Temperature
|
135 C
|
Speed
|
100 rpm
|
Spindle size
|
21 in
|
Torque
|
55 %
|
Viscosity reading #1 (A)
|
0.272 Pa-s
|
Viscosity reading #2 (B)
|
0.277 Pa-s
|
Viscosity reading #3 (C)
|
0.276 Pa-s
|
Average viscosity
|
0.275 Pa-s
|
DIME Test ID: 2023-03-23-8-6
Test Method: AASHTO T44-18: Standard Method of Test for Solubility of Bituminous Materials
Verified Date: 04/30/2023
Date Tested: 03/28/2023
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Was test performed on residue from distillation or evaporation?
|
NA
|
Soluble, percent
|
99.8 %
|
Insoluble, percent
|
0.2 %
|