Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 66667 DEA: JMFPP EFIS: 0019000043
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2023-03-17-19
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Verification
Type of Material: Hot Mix Asphalt
Sample Taken Date: 03/17/2023
Date that the sample was received by the laboratory/organization performing the testing: 03/17/2023
The quantity of what the sample constitutes: 24 boxes, 4 qrts binder
A brief description of the sample: 3/4 HMA
From where was the sample collected: Source
Laboratory sample identification: 023-014
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Construction Company
DIME Test ID: 2023-03-17-19-2
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/03/2023
Date Tested: 04/03/2023
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of Samples
|
2
|
What is the unit of measurement for theoretical density?
|
SI Units
|
Mass Determination
|
Water
|
Method Performed
|
Mechanical Agitation - Method A
|
Mass of oven-dry sample in air for Sample 1
|
2614.0 grams
|
Mass of container submerged in water for Sample 1
|
1345.0 grams
|
Mass of the sample and container in water for Sample 1
|
2942.6 grams
|
Mass of oven-dry sample in air for Sample 2
|
2771.0 grams
|
Mass of container submerged in water for Sample 2
|
1345.0 grams
|
Mass of the sample and container in water for Sample 2
|
3033.8 grams
|
Temperature of Water
|
77 °F
|
Specific Gravity for Sample 1
|
2.572
|
Specific Gravity for Sample 2
|
2.561
|
Average Specific Gravity
|
2.567
|
Theoretical maximum density at 25°C (77°F)
|
2559.6 kg/m^3
|
DIME Test ID: 2023-03-17-19-3
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 04/03/2023
Date Tested: 04/03/2023
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Percent Air Voids
|
3.6 %
|
Percent Air Voids 2
|
4.0 %
|
Percent Air Voids 3
|
4.1 %
|
Percent Air Voids Average
|
3.9 %
|
DIME Test ID: 2023-03-17-19-4
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 04/03/2023
Date Tested: 04/03/2023
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Bulk Specific Gravity
|
2.474
|
Bulk Specific Gravity 2
|
2.464
|
Bulk Specific Gravity 3
|
2.462
|
Average Bulk Specific Gravity
|
2.467
|
DIME Test ID: 2023-03-17-19-5
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 04/03/2023
Date Tested: 04/03/2023
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Unit system used?
|
SI Units
|
Average Dry Tensile Strength
|
105 psi
|
Average Wet Tensile Strength
|
108 psi
|
Tensile Strength Ratio
|
1.03
|
DIME Test ID: 2023-03-17-19-6
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 04/03/2023
Date Tested: 04/03/2023
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used?
|
Fahrenheit
|
Test procedure used?
|
Method A
|
Mass of HMA Sample prior to ignition
|
2147.1 g
|
Corrected Asphalt Binder Content
|
4.45 %
|
Mass Loss
|
109.6 g
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.49 %
|
Moisture Content
|
0.00 %
|
Temperature Compensation Factor
|
0.16 %
|
Test Temperature
|
1000 F
|
DIME Test ID: 2023-03-17-19-7
Test Method: AASHTO T329-13: Standard Method of Test for Moisture Content of Asphalt Mixtures by Oven Method (Moisture Content)
Verified Date: 04/03/2023
Date Tested: 04/03/2023
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Moisture Content
|
0.20 %
|
Percent Change
|
0.2 %
|
DIME Test ID: 2023-03-17-19-8
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Verified Date: 04/03/2023
Date Tested: 04/03/2023
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Average impression at 5000 passes (left/right avg)
|
3.35 mm
|
Average impression at 10000 passes (left/right avg)
|
3.67 mm
|
Average impression at 15000 passes (left/right avg)
|
4.05 mm
|
Average impression at 20000 passes (left/right avg)
|
no data
|
Average impression at 25000 passes (left/right avg)
|
no data
|