Sample Record for 2015-09-03-4
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 208862 DEA: 080K7104 EFIS: 0800000366
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-15,215-14.0/R16.4,16.0/17.8
Work Description: I-15/I-215 Interchange Improvements (Devore)
Location Description: On I-15 from 0.8 mile south of Glen Helen Parkway UC to 1.4 mile north of Kenwood Ave UC And On I-215 from 1.2 mile south of Devore Road OC to the I-15 junction
Contractor Name: Atkinson Construction,, LLC
Contractor Address: 1672 Devore Road, San Bernardino, CA 92407
Resident Engineer: Owen Spencer Structure Rep.: Scott Gueltzow
Sample Information
DIME Sample ID: 2015-09-03-4
TL Number from the TL Form: L88 CSP 002
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 09/03/2015
Date that the sample was received by the laboratory/organization performing the testing: 09/05/2015
The quantity of what the sample constitutes: 2
A brief description of the sample: 6X12
From where was the sample collected: Job Site
Laboratory sample identification: 868-02
Structure unique identifier: DEVORE INTCHGE IMP
Structure name: BED 14
The fabricator/manufacturer/facility name: Coreslab Structures
Material Information
The concrete mix design number: 1357 1A
The truck number from where the sample was collected: Unknown
The batch plant ticket number from where the sample was collected: NP
Concrete batch plant: Unknown
The fabricator/manufacturer designation for the sample: Unknown
A detailed description of where the material sample was collected: MIX TRUCK
Where the material sample would have been placed if not sampled: Unknown
From Lot No.:
Bag Lot No.:
Test Results
Test 1 of 1
DIME Test ID: 2015-09-03-4-1
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Verified Date: 09/10/2015
Date Tested: 09/10/2015
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used?
|
US Units
|
Number of specimens
|
2
|
Test performed
|
With no density determined
|
Capped in accordance with?
|
ASTM C617/CTM521
|
Average diameter of cylinder 1
|
6.03 in
|
Average diameter of cylinder 2
|
6.03 in
|
Cross sectional area of cylinder 1
|
28.56 in^2
|
Cross sectional area of cylinder 2
|
28.56 in^2
|
Compressive strength (to nearest 10 psi)
|
6740 psi
|
Maximum load on cylinder 1
|
194140 lb
|
Maximum load on cylinder 2
|
190790 lb
|
Compressive strength of cylinder 1
|
6797.6 psi
|
Type of fracture pattern of cylinder 1
|
3
|
Compressive strength of cylinder 2
|
6680.3 psi
|
Type of fracture pattern of cylinder 2
|
3
|
Comment on any defect in either specimen or caps (Max 250 Characters)
|
no data
|
Correction factor for cylinder 1
|
1
|
Correction factor for cylinder 2
|
no data
|
Age of specimen
|
7 days
|
Age of specimen in hours
|
no data
|