Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993511 DEA: 120R2004 EFIS: 1218000065
QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA-5-0.0/2.0
Work Description: PLACE PRECAST CONCRETE PAVEMENT AND REPLACE CONCRETE SLAB.
Location Description: ORANGE COUNTY IN SAN CLEMENTE FROM ORANGE COUNTY LINE TO 0.4 MILE NORTH OF EL CAMINO REAL UNDERCROSSING
Contractor Name: Myers & Sons (SBE)
Contractor Address: 2554 Millcreek Drive, Sacramento, CA 95833
Resident Engineer: Mona Shahidi Structure Rep.: Unknown
DIME Sample ID: 2023-01-20-47
TL Number from the TL Form:
Sample Submitted By Organization: Pro-Cast Products, Incorporated - Highland
Sample Organization Contact: (909) 793-7602
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 01/20/2023
Date that the sample was received by the laboratory/organization performing the testing: 01/23/2023
The quantity of what the sample constitutes: 8
A brief description of the sample: 6x12 concrete cylinders
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: ProCast Products
The concrete mix design number: RRM14062
The truck number from where the sample was collected:
The batch plant ticket number from where the sample was collected: TT
Concrete batch plant:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: Concrete sample from wheelbarrow
Where the material sample would have been placed if not sampled:
From Lot No.:
Bag Lot No.:
DIME Test ID: 2023-01-20-47-1
Test Method: ASTM C1064-17: Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
Verified Date: 02/21/2023
Date Tested: 01/20/2023
Submitted By Organization: Pro-Cast Products, Incorporated - Highland
Organization Address: 27417 East Third Street, P.O. Box 602
Organization City: Highland
Organization State: CA
Organization Zipcode: 92346
Organization Email: miker@procast.us
Organization Phone: (909) 557-3336
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
DIME Test ID: 2023-01-20-47-2
Test Method: ASTM C143-20: Standard Test Method for Slump of Hydraulic-Cement Concrete
Verified Date: 02/21/2023
Date Tested: 01/20/2023
Submitted By Organization: Pro-Cast Products, Incorporated - Highland
Organization Address: 27417 East Third Street, P.O. Box 602
Organization City: Highland
Organization State: CA
Organization Zipcode: 92346
Organization Email: miker@procast.us
Organization Phone: (909) 557-3336
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
DIME Test ID: 2023-01-20-47-3
Test Method: ASTM C39-18: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Verified Date: 02/21/2023
Date Tested: 02/17/2023
Submitted By Organization: Pro-Cast Products, Incorporated - Highland
Organization Address: 27417 East Third Street, P.O. Box 602
Organization City: Highland
Organization State: CA
Organization Zipcode: 92346
Organization Email: miker@procast.us
Organization Phone: (909) 557-3336
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used?
|
US Units
|
Number of specimens
|
2
|
Test performed
|
With no density determined
|
Average diameter of cylinder 1
|
6.00 in
|
Average diameter of cylinder 2
|
6.00 in
|
Capped in accordance with?
|
ASTM C617 - Sulfur Mortar Cap
|
Cross sectional area of cylinder 1
|
28.27 in^2
|
Cross sectional area of cylinder 2
|
28.27 in^2
|
Compressive strength (to nearest 10 psi)
|
7110 psi
|
Maximum load on cylinder 1
|
192130 lb
|
Maximum load on cylinder 2
|
209480 lb
|
Type of fracture pattern of cylinder 1
|
2
|
Type of fracture pattern of cylinder 2
|
3
|
Comment on any defect in either specimen or caps (Max 250 Characters)
|
no data
|
Correction factor for cylinder 1
|
0
|
Correction factor for cylinder 2
|
0
|
Age of specimen
|
28 days
|
Age of specimen in hours
|
0 hours
|
DIME Test ID: 2023-01-20-47-4
Test Method: ASTM C138-17a: Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
Verified Date: 02/21/2023
Date Tested: 01/20/2023
Submitted By Organization: Pro-Cast Products, Incorporated - Highland
Organization Address: 27417 East Third Street, P.O. Box 602
Organization City: Highland
Organization State: CA
Organization Zipcode: 92346
Organization Email: miker@procast.us
Organization Phone: (909) 557-3336
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Identification of concrete represented by the sample
|
RRM14062
|
Volume of the measure
|
0.249 ft^3
|
Density of concrete
|
145.8 lb/ft^3
|
Yield of concrete
|
no data
|
Relative yield of the batch
|
no data
|
Cement content
|
no data
|
Air content
|
no data
|