Sample Record for 2023-02-02-20
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 214355 DEA: 120K0214 EFIS: 1214000096
QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA-5-12.4/14.5
Work Description: South County Improvement Project (Phase 1 - Avery/Crown Valley) PLACE HMA, INSTALL CONC PAVEMENT, RETAIN WALL, MODIFY ELECT SYS. | Add one lane btwn 73 & Oso PKWY
Location Description: ORANGE COUNTY IN SAN JUAN CAPISTRANO, LAGUNA HILLS, LAGUNA NIGUEL AND MISSION VIEJO FROM 0.5 MILE SOUTH OF AVERY PARKWAY UNDERCROSSING TO 0.8 MILE NORTH OF CROWN VALLEY PARKWAY OVERCROSSING
Contractor Name: ORTIZ ENTERPRISES, INC.
Contractor Address: 6 Cushing, Suite 200, Irvine, CA 92618
Resident Engineer: Kifah Ramadan Structure Rep.: Imad Karam
Sample Information
DIME Sample ID: 2023-02-02-20
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM1 - Elastomeric Bearing Pad
Sample Taken Date: 02/02/2023
Date that the sample was received by the laboratory/organization performing the testing: 02/03/2023
The quantity of what the sample constitutes: 31
A brief description of the sample: Bearing Pad
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Scougal Rubber
Material Information
Mfg. Lot Number(s): 22785-1
Material/Compound/Elastomer ID: NA
Samples Representing: 31
Description (size): 1.15x4x6
Comments:
Description (Number of Shims): 2
Type of Bearing Pad: Steel
Description (Thickness of Shims): 14 gage
Manufacturer(s): Scougal Rubber
Batch Number: NA
Test Results
Test 1 of 4
DIME Test ID: 2023-02-02-20-1
Test Method: ASTM D2240-15r21: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 02/08/2023
Date Tested: 02/07/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: hardness
Test Result Compliance:
Additional Comments When Verified:
|
Temperature
|
72 f
|
|
Humidity
|
50 %
|
|
Reading #1
|
55
|
|
Reading #2
|
54
|
|
Reading #3
|
50
|
|
Reading #4
|
55
|
|
Reading #5
|
52
|
|
Mean
|
53.2
|
Test 2 of 4
DIME Test ID: 2023-02-02-20-2
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 02/08/2023
Date Tested: 02/06/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of specimens tested
|
5
|
|
Unit of the Ultimate Tensile Values
|
lbf per sqr in
|
|
UTM
|
2kip
|
|
Humidity
|
50.00 %
|
|
Temperature
|
72 F
|
|
Sample 1 Median Thickness
|
0.066
|
|
Sample 1 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 1 Ultimate Tensile
|
2215.84 lbf/in^2
|
|
Sample 1 Elongation (350% Min)
|
Pass
|
|
Sample 2 Median Thickness
|
0.067
|
|
Sample 2 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 2 Ultimate Tensile
|
2701.01 lbf/in^2
|
|
Sample 2 Elongation (350% Min)
|
Pass
|
|
Sample 3 Median Thickness
|
0.069
|
|
Sample 3 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 3 Ultimate Tensile
|
2459.92 lbf/in^2
|
|
Sample 3 Elongation (350% Min)
|
Pass
|
|
Sample 4 Median Thickness
|
0.069
|
|
Sample 4 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 4 Ultimate Tensile
|
2655.22 lbf/in^2
|
|
Sample 4 Elongation (350% Min)
|
Pass
|
|
Sample 5 Median Thickness
|
0.067
|
|
Sample 5 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 5 Ultimate Tensile
|
2507.37 lbf/in^2
|
|
Sample 5 Elongation (350% Min)
|
Pass
|
|
Median of the Ultimate Tensile Values
|
2507.4 lbf/in^2
|
Test 3 of 4
DIME Test ID: 2023-02-02-20-3
Test Method: ASTM D624-00r20: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Verified Date: 02/08/2023
Date Tested: 02/06/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of specimens tested
|
3
|
|
UTM
|
2kip
|
|
Humidity
|
50.00 %
|
|
Temperature
|
72 F
|
|
Sample 1 Median Thickness
|
0.061
|
|
Sample 1 Tear Strength
|
205.3
|
|
Sample 2 Median Thickness
|
0.061
|
|
Sample 2 Tear Strength
|
272.2
|
|
Sample 3 Median Thickness
|
0.059
|
|
Sample 3 Tear Strength
|
212.9
|
|
Median of the Tear Strength Values
|
212.9 lb/in
|
Test 4 of 4
DIME Test ID: 2023-02-02-20-4
Test Method: SMTL BILST-06: (Neoprene Verification) Bilstein Test
Verified Date: 02/07/2023
Date Tested: 02/07/2023
Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: sanchita.dey@dot.ca.gov
Organization Phone: (916) 227-7912
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
