Print Report | Back to Sample Detail

Sample Record for 2015-08-06-5

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 209920 DEA: 072W5404 EFIS: 0713000206 QA Service Level: 1
DIST-CO-RTE-PM: 07-KER-5725-
Work Description: CONSTRUCT WASH BUILDING FACILITY.
Location Description: KERN COUNTY IN LEBEC AT THE LEBEC MAINTENANCE STATION AT 1586 LEBEC SERVICE ROAD
Contractor Name: GEMS ENVIRONMENTAL MANAGEMENT SERVICES, INC.
Contractor Address: 1120 Willow Pass Ct., Corcord, CA 94520
Resident Engineer: Efraim Chavez Structure Rep.: Paramananthan Piratheepan

Sample Information

DIME Sample ID: 2015-08-06-5
TL Number from the TL Form: 2W5404 1
Sample Submitted By Organization: CT - Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 08/06/2015
Date that the sample was received by the laboratory/organization performing the testing: 08/11/2015
The quantity of what the sample constitutes: 2
A brief description of the sample: 6X12
From where was the sample collected: Job Site
Laboratory sample identification: 917-4-1
Structure unique identifier: 1586 LEBEC SERVICE RD LEBEC CA
Structure name: BUILDING FOOTING
The fabricator/manufacturer/facility name: JOB

Material Information

The concrete mix design number: RD-CLASS2
The truck number from where the sample was collected: A108
The batch plant ticket number from where the sample was collected: 21624
Concrete batch plant: Unknown
The fabricator/manufacturer designation for the sample: Unknown
A detailed description of where the material sample was collected: CHUTE
Where the material sample would have been placed if not sampled: Unknown
From Lot No.:
Bag Lot No.:

Test Results

Test 1 of 1

DIME Test ID: 2015-08-06-5-1
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Verified Date: 09/03/2015
Date Tested: 09/03/2015
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Number of specimens 2
Test performed With no density determined
Cross sectional area of cylinder 1 28.37 in^2
Cross sectional area of cylinder 2 28.37 in^2
Capped in accordance with? ASTM C617/CTM521
Compressive strength (to nearest 10 psi) 3950 psi
Average diameter of cylinder 1 6.01 in
Average diameter of cylinder 2 6.01 in
Compressive strength of cylinder 1 3964.8 psi
Compressive strength of cylinder 2 3941.5 psi
Maximum load on cylinder 1 112480 lb
Maximum load on cylinder 2 111820 lb
Type of fracture pattern of cylinder 1 3
Type of fracture pattern of cylinder 2 3
Comment on any defect in either specimen or caps (Max 250 Characters) no data
Correction factor for cylinder 1 1
Correction factor for cylinder 2 no data
Age of specimen 28 days

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.