Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 993869 DEA: 061E1904 EFIS: 0621000224
QA Service Level: 1
DIST-CO-RTE-PM: 06-FRE,TUL-41,137,168-Var
Work Description: BRIDGE DECK SURFACING AND POLYESTER CONCRETE OVERLAY.
Location Description: FRESNO AND TULARE COUNTIES AT VARIOUS LOCATIONS
Contractor Name: Peterson Chase General Engineering
Contractor Address: 16351 Construction Circle West, Irvine, CA 92606
Resident Engineer: Fernando De Alba Structure Rep.: Unknown
DIME Sample ID: 2022-07-21-70
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 07/21/2022
Date that the sample was received by the laboratory/organization performing the testing: 07/22/2022
The quantity of what the sample constitutes: 14 Totes
A brief description of the sample: 1 gallon can
From where was the sample collected: Source
Laboratory sample identification: 943757
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia
DIME Test ID: 2022-07-21-70-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 03/29/2023
Date Tested: 12/06/2022
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
DIME Test ID: 2022-07-21-70-2
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 03/29/2023
Date Tested: 12/06/2022
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Density Units
|
pounds/gallons
|
|
Liquid Density (pounds per gallon)
|
9
|
DIME Test ID: 2022-07-21-70-3
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 03/29/2023
Date Tested: 07/29/2022
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted vendor's results.
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of specimens tested
|
5
|
|
Conditioning procedure
|
18/25/50+5/70
|
|
Speed of testing
|
0.45 in/min
|
|
Sample 1 Width
|
0.488 in
|
|
Sample 1 Ultimate strength
|
3727.3 psi
|
|
Sample 1 Thickness
|
0.251 in
|
|
Sample 1 Area
|
0.1225 in^2
|
|
Sample 1 Ultimate Strength Actual
|
456.6 lbs
|
|
Sample 1 percent elongation
|
67.47 %
|
|
Sample 1 Time
|
0 MM:SS
|
|
Sample 2 Width
|
0.487 in
|
|
Sample 2 Thickness
|
0.258 in
|
|
Sample 2 Area
|
0.1256 in^2
|
|
Sample 2 Ultimate strength
|
3582.8 psi
|
|
Sample 2 Ultimate Strength Actual
|
450 lbs
|
|
Sample 2 percent elongation
|
61.59 %
|
|
Sample 2 Time
|
0 MM:SS
|
|
Sample 3 Width
|
0.487 in
|
|
Sample 3 Thickness
|
0.257 in
|
|
Sample 3 Area
|
0.1252 in^2
|
|
Sample 3 Ultimate strength
|
3637.4 psi
|
|
Sample 3 Ultimate Strength Actual
|
455.4 lbs
|
|
Sample 3 percent elongation
|
64.85 %
|
|
Sample 3 Time
|
0 MM:SS
|
|
Sample 4 Width
|
0.484 in
|
|
Sample 4 Thickness
|
0.25 in
|
|
Sample 4 Area
|
0.121 in^2
|
|
Sample 4 Ultimate strength
|
3643 psi
|
|
Sample 4 Ultimate Strength Actual
|
440.8 lbs
|
|
Sample 4 percent elongation
|
63.9 %
|
|
Sample 4 Time
|
0 MM:SS
|
|
Sample 5 Width
|
0.488 in
|
|
Sample 5 Thickness
|
0.259 in
|
|
Sample 5 Area
|
0.1264 in^2
|
|
Sample 5 Ultimate strength
|
3624.2 psi
|
|
Sample 5 Ultimate Strength Actual
|
458.1 lbs
|
|
Sample 5 percent elongation
|
64.16 %
|
|
Sample 5 Time
|
0 MM:SS
|
|
Ultimate Strength Average
|
3643 psi
|
|
Percent Elongation Average
|
64 %
|
DIME Test ID: 2022-07-21-70-4
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 03/29/2023
Date Tested: 12/06/2022
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Mean of two volatile content determination
|
45.4
|
DIME Test ID: 2022-07-21-70-5
Test Method: CTM 551-August 2012: Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures
Verified Date: 03/29/2023
Date Tested: 11/18/2022
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted vendor's results.
Test Result Compliance: complies
Additional Comments When Verified:
|
Curing history for Sample 1
|
24hr
|
|
Maximum applied load (P) for Sample 1
|
1540.4 lb
|
|
Span length for Sample 1
|
9 in
|
|
Break location for Sample 1
|
bond
|
|
Specimen defects/notes for Sample 1
|
no data
|
|
Surface type for Sample 1
|
SSD
|
|
Modulus of rupture (R) for Sample 1
|
770.2 psi
|
|
Curing history for Sample 2
|
24hr
|
|
Maximum applied load (P) for Sample 2
|
1627 lb
|
|
Span length for Sample 2
|
9 in
|
|
Break location for Sample 2
|
bond
|
|
Specimen defects/notes for Sample 2
|
no data
|
|
Surface type for Sample 2
|
SSD
|
|
Modulus of rupture (R) for Sample 2
|
813.5 psi
|
|
Curing history for Sample 3
|
24hr
|
|
Maximum applied load (P) for Sample 3
|
1470 lb
|
|
Span length for Sample 3
|
9 in
|
|
Break location for Sample 3
|
bond
|
|
Specimen defects/notes for Sample 3
|
no data
|
|
Surface type for Sample 3
|
SSD
|
|
Modulus of rupture (R) for Sample 3
|
735 psi
|
DIME Test ID: 2022-07-21-70-6
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 03/29/2023
Date Tested: 11/17/2022
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted vendor's results.
Test Result Compliance: complies
Additional Comments When Verified:
|
Diameter of lid
|
153.9 mm
|
|
Room Temperature
|
77 f
|
|
Tare weight
|
no data
|
|
Initial weight
|
100.036 grams
|
|
Weight at 5 minutes
|
99.921 grams
|
|
Weight at 10 minutes
|
99.834 grams
|
|
Weight at 15 minutes
|
99.741 grams
|
|
Weight at 20 minutes
|
99.624 grams
|
|
Weight at 25 minutes
|
99.545 grams
|
|
Weight at 30 minutes
|
99.458 grams
|
|
Final weight
|
99.46 grams
|
|
Total weight loss
|
0.58 grams
|
|
Calculated radius of gallon can lid in cm
|
7.695 cm
|
|
Lid Factor
|
53.757 m^2
|
|
Volatile emission
|
30.964 grams/m^2
|
