Print Report | Back to Sample Detail

Sample Record for 2022-11-09-4

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 214336 DEA: 07302404 EFIS: 0713000488 QA Service Level: 1
DIST-CO-RTE-PM: 07-VEN-101-37/40
Work Description: PADRE JUAN REHAB
Location Description: VEN 101
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 4820 McGrath Street, Suite 101, Ventura, CA 93003
Resident Engineer: Alfred Ira Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2022-11-09-4
TL Number from the TL Form:
Sample Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Sample Organization Contact: (213) 817-0387
Type of Sample: Quality Assurance
Type of Material: Aggregate
Sample Taken Date: 11/09/2022
Date that the sample was received by the laboratory/organization performing the testing: 11/09/2022
The quantity of what the sample constitutes: 3136 sq. ft.
A brief description of the sample: Aggregate
From where was the sample collected: Job Site
Laboratory sample identification: 22-3016
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: n/a

Material Information

Source Identification (SMARA, name of Pit or Job Site): n/a
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: CTM 231 Test Holes
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/8 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2022-11-09-4-1
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Verified Date: 11/10/2022
Date Tested: 11/09/2022
Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Organization Address: 1940 South Workman Mill Road,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90601
Organization Email: chad.chotibhongs@dot.ca.gov
Organization Phone: (213) 817-0387
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Standard Count Density 2104 g/cc
Count or Density 1 2021 g/cc
Count or Density 2 2046 g/cc
Count or Density 3 2050 g/cc
Standard Count Moisture 707 g/cc
Moisture Count 1 190 g/cc
Moisture Count 2 177 g/cc
Moisture Count 3 172 g/cc
Sum of Count or Density 6117.00 g/cc
Average of Count or Density 2039.00 g/cc
Sum of Moisture Count 539.00 g/cc
Average of Moisture Count 180.00 g/cc
Count Ratio Density 0.97
Count Ratio Moisture 0.25
Calculated Percent Relative Compaction 95.9 %
Reported Percent Relative Compaction 96 %

Test 2 of 2

DIME Test ID: 2022-11-09-4-2
Test Method: CTM 216-June 2011: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates
Verified Date: 11/10/2022
Date Tested: 11/09/2022
Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Organization Address: 1940 South Workman Mill Road,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90601
Organization Email: chad.chotibhongs@dot.ca.gov
Organization Phone: (213) 817-0387
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Is oversize material No
In-place wet density 2.12
Highest adjust wet density 2.21
Relative compaction 96
% Moisture 11.0 %
Optimum Moisture 11.0 %