Print Report | Back to Sample Detail

Sample Record for 2022-10-27-47

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215697 DEA: 07318204 EFIS: 0715000286 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-Route 1-4.0/4.2
Work Description: CM/GC Project - Work consists of constructing secant wall and slope restoration
Location Description: near Point Mugu State Park 0.4 mile South of Sycamore Canyon Road.
Contractor Name: Flatiron/Drill Tech, a Joint Venture
Contractor Address: 15335 Fairfield Ranch Rd, Chino Hills, CA 91709
Resident Engineer: Saeid Shakeri Structure Rep.: Azizollah Maghsoudloo

Sample Information

DIME Sample ID: 2022-10-27-47
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM1 - Elastomeric Bearing Pad
Sample Taken Date: 10/27/2022
Date that the sample was received by the laboratory/organization performing the testing: 11/02/2022
The quantity of what the sample constitutes: 7
A brief description of the sample: Bearing Pad
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Scougal Rubber

Material Information

Mfg. Lot Number(s): L031122
Material/Compound/Elastomer ID: NA
Samples Representing: 7
Description (size): 1X4X6
Comments:
Description (Number of Shims): 2
Type of Bearing Pad: Steel
Description (Thickness of Shims): 14 gage
Manufacturer(s): Scougal Rubber
Batch Number: NA
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2022-10-27-47-1
Test Method: ASTM D2240-15r21: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 11/15/2022
Date Tested: 11/08/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test: Hardness
Test Result Compliance:
Additional Comments When Verified:
Temperature 72 f
Humidity 50 %
Reading #1 52
Reading #2 51
Reading #3 51
Reading #4 51
Reading #5 52
Mean 51.4

Test 2 of 4

DIME Test ID: 2022-10-27-47-2
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 11/15/2022
Date Tested: 11/08/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 3
Unit of the Ultimate Tensile Values lbf per sqr in
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.083
Sample 1 Thickness all Within 0.003 inch? Yes
Sample 1 Ultimate Tensile 2972.91 lbf/in^2
Sample 1 Elongation (350% Min) Pass
Sample 2 Median Thickness 0.084
Sample 2 Thickness all Within 0.003 inch? Yes
Sample 2 Ultimate Tensile 2781.02 lbf/in^2
Sample 2 Elongation (350% Min) Pass
Sample 3 Median Thickness 0.083
Sample 3 Thickness all Within 0.003 inch? Yes
Sample 3 Ultimate Tensile 2867.53 lbf/in^2
Sample 3 Elongation (350% Min) Pass
Median of the Ultimate Tensile Values 2867.5 lbf/in^2

Test 3 of 4

DIME Test ID: 2022-10-27-47-3
Test Method: ASTM D624-00r20: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Verified Date: 11/15/2022
Date Tested: 11/08/2022
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 3
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.074
Sample 1 Tear Strength 262.3
Sample 2 Median Thickness 0.078
Sample 2 Tear Strength 266.3
Sample 3 Median Thickness 0.072
Sample 3 Tear Strength 261.5
Median of the Tear Strength Values 262.3 lb/in

Test 4 of 4

DIME Test ID: 2022-10-27-47-4
Test Method: SMTL BILST-06: (Neoprene Verification) Bilstein Test
Verified Date: 11/08/2022
Date Tested: 11/08/2022
Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: sanchita.dey@dot.ca.gov
Organization Phone: (916) 227-7912
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Result Pass