Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 44444 DEA: ASCP EFIS: ASCP
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for Asphalt Supplier Certification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2022-10-27-41
TL Number from the TL Form:
Sample Submitted By Organization: Western Emulsions, Incorporated - White City Emulsion
Sample Organization Contact: (208) 589-8608
Type of Sample: Quality Control
Type of Material: Asphalt Binder
Sample Taken Date: 10/27/2022
Date that the sample was received by the laboratory/organization performing the testing: 10/27/2022
The quantity of what the sample constitutes: 2 qts
A brief description of the sample: Asphalt Binder Sample
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Western Emulsions - White City OR
Performance Grade: PG 58-22
Modified: No
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Certified Asphalt Supplier: Western Emulsion - White City Emulsion Plant - White City OR
Multigrade: No
Multigrade Type:
Asphalt Binder Mix Number:
DIME Test ID: 2022-10-27-41-1
Test Method: AASHTO T316-17: Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
Verified Date: 11/10/2022
Date Tested: 10/27/2022
Submitted By Organization: Western Emulsions, Incorporated - White City Emulsion
Organization Address: 7701 11th Street,
Organization City: White City
Organization State: OR
Organization Zipcode: 97503
Organization Email: ehubert@idahoasphalt.com
Organization Phone: (208) 589-8608
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Is viscosity reading in cP/Pa-s?
|
Pa-s
|
|
Time of test
|
9:33 HH:MM
|
|
Test Temperature
|
135.0 C
|
|
Speed
|
20 rpm
|
|
Spindle size
|
21 in
|
|
Torque
|
11.0 %
|
|
Viscosity reading #1 (A)
|
0.284 Pa-s
|
|
Viscosity reading #2 (B)
|
0.281 Pa-s
|
|
Viscosity reading #3 (C)
|
0.279 Pa-s
|
|
Average viscosity
|
0.281 Pa-s
|
DIME Test ID: 2022-10-27-41-2
Test Method: AASHTO T228-09r13: Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials (Specific Gravity)
Verified Date: 11/10/2022
Date Tested: 10/27/2022
Submitted By Organization: Western Emulsions, Incorporated - White City Emulsion
Organization Address: 7701 11th Street,
Organization City: White City
Organization State: OR
Organization Zipcode: 97503
Organization Email: ehubert@idahoasphalt.com
Organization Phone: (208) 589-8608
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
DIME Test ID: 2022-10-27-41-3
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 11/10/2022
Date Tested: 10/27/2022
Submitted By Organization: Western Emulsions, Incorporated - White City Emulsion
Organization Address: 7701 11th Street,
Organization City: White City
Organization State: OR
Organization Zipcode: 97503
Organization Email: ehubert@idahoasphalt.com
Organization Phone: (208) 589-8608
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Phase
|
Original binder
|
|
Test Plate Diameter
|
25 mm
|
|
Phase Angle (δ) (for the 10 cycles)
|
86.5 degree
|
|
Dynamic Shear, G*/sin(δ)
|
1.32 kPa
|
DIME Test ID: 2022-10-27-41-4
Test Method: AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
Verified Date: 11/10/2022
Date Tested: 10/27/2022
Submitted By Organization: Western Emulsions, Incorporated - White City Emulsion
Organization Address: 7701 11th Street,
Organization City: White City
Organization State: OR
Organization Zipcode: 97503
Organization Email: ehubert@idahoasphalt.com
Organization Phone: (208) 589-8608
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Is mass change based on one or two containers?
|
One
|
|
Average mass change
|
-0.362 percent
|
DIME Test ID: 2022-10-27-41-5
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 11/10/2022
Date Tested: 10/27/2022
Submitted By Organization: Western Emulsions, Incorporated - White City Emulsion
Organization Address: 7701 11th Street,
Organization City: White City
Organization State: OR
Organization Zipcode: 97503
Organization Email: ehubert@idahoasphalt.com
Organization Phone: (208) 589-8608
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Phase
|
RTFO residue
|
|
Phase Angle (δ) (for the 10 cycles)
|
82.1 degree
|
|
Dynamic Shear, G*/sin(δ)
|
3.74 kPa
|
DIME Test ID: 2022-10-27-41-6
Test Method: AASHTO T51-22: Standard Method of Test for Ductility of Asphalt Materials (Asphalt Binder)
Verified Date: 11/10/2022
Date Tested: 10/27/2022
Submitted By Organization: Western Emulsions, Incorporated - White City Emulsion
Organization Address: 7701 11th Street,
Organization City: White City
Organization State: OR
Organization Zipcode: 97503
Organization Email: ehubert@idahoasphalt.com
Organization Phone: (208) 589-8608
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Is a normal test obtainable?
|
Yes
|
|
Number of replicates tested
|
Three
|
|
Ductility of test #1 (D1)
|
97 cm
|
|
Ductility of test #2 (D2)
|
97 cm
|
|
Ductility of test #3 (D3)
|
95 cm
|
|
Ductility of sample
|
96 cm
|
DIME Test ID: 2022-10-27-41-7
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 11/10/2022
Date Tested: 10/28/2022
Submitted By Organization: Western Emulsions, Incorporated - White City Emulsion
Organization Address: 7701 11th Street,
Organization City: White City
Organization State: OR
Organization Zipcode: 97503
Organization Email: ehubert@idahoasphalt.com
Organization Phone: (208) 589-8608
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Phase
|
PAV residue
|
|
Test Plate Diameter
|
8 mm
|
|
Phase Angle (δ) (for the 10 cycles)
|
45.6 degree
|
|
(G*) x sin(δ)=
|
2280 kPa
|
DIME Test ID: 2022-10-27-41-8
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 11/10/2022
Date Tested: 10/27/2022
Submitted By Organization: Western Emulsions, Incorporated - White City Emulsion
Organization Address: 7701 11th Street,
Organization City: White City
Organization State: OR
Organization Zipcode: 97503
Organization Email: ehubert@idahoasphalt.com
Organization Phone: (208) 589-8608
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Phase
|
PAV residue
|
|
Test Plate Diameter
|
8 mm
|
|
Phase Angle (δ) (for the 10 cycles)
|
45.6 degree
|
|
(G*) x sin(δ)=
|
2280 kPa
|
