Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 215723 DEA: 032H2404 EFIS: 0317000084
QA Service Level: 1
DIST-CO-RTE-PM: 03-BUT-32-7.6/7.9
Work Description: UPGRADE SIGNALS AND LIGHTING, CURB RAMPS AND CONSTRUCT A TURNING LANE.
Location Description: CITY OF CHICO IN BUTTE COUNTY ON STATE ROUTE 32 AT THE INTERSECTION OF WEST SACRAMENTO AVENUE (WEST) AND WEST SACRAMENTO AVENUE (EAST)
Contractor Name: Lamon Construction Co., Inc.
Contractor Address: 871 Von Geldern Way, Yuba City, CA 95991
Resident Engineer: Daniel Rechs Structure Rep.: Unknown
DIME Sample ID: 2022-07-27-69
TL Number from the TL Form: 778102
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Acceptance
Type of Material: Asphalt Binder
Sample Taken Date: 07/27/2022
Date that the sample was received by the laboratory/organization performing the testing: 11/01/2022
The quantity of what the sample constitutes: 1of 1
A brief description of the sample: PG64-16
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Valero - Benicia, CA
Performance Grade: PG 64-16
Modified:
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Certified Asphalt Supplier: Valero Marketing & Supply - Benicia CA
Multigrade: Yes
Multigrade Type: PG 64-16 / PG 64-10
Asphalt Binder Mix Number:
DIME Test ID: 2022-07-27-69-1
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 11/09/2022
Date Tested: 11/08/2022
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Phase
|
Original binder
|
|
Test Gap
|
1 mm
|
|
Test Frequency
|
10.0 rad/s
|
|
Strain Amplitude
|
12.00 %
|
|
Stress Amplitude
|
0.171 kPa
|
|
Phase Angle (δ) (for the 10 cycles)
|
85.0 degree
|
|
Complex Modulus (G*) (for the 10 measurements)
|
1.426 kPa
|
|
Test Temperature (Specimen 1)
|
64.0 C
|
|
Dynamic Shear, G*/sin(δ)
|
1.43 kPa
|
